1.
To apply an undercoat to.
给…加内涂层给…上内层涂料（底部防锈层）
2.
A tarlike substance sprayed on the underside of a vehicle to prevent rusting.
底部防锈层喷在交通工具底部以防止生锈的类似柏油的物质
3.
anticorrosion anticorrosive
防锈漆 a. 防锈的
4.
The bright metal parts should be protected from dampness and rust in transit by a coating of antirust grease.
发亮的金属部件应涂上一层防锈油脂，以防运输途中受潮生锈。
5.
All buried lines are coated with a protective covering to save them from corrosion.
所有埋设的管道必须涂上保护层，以防生锈腐蚀。
6.
High-Temperature Corrotion Behavior of 310SS and It's Protection;
310不锈钢高温气体腐蚀行为及其防护涂层研究
7.
Microstructure and Corrosion Resistance of Nano-Sized TiO_2 Coating on 304 Stainless Steel
304不锈钢纳米TiO_2涂层的结构形貌与防腐蚀性能
8.
(of motor vehicles) having a coating of tar or rubber-based material applied to the underside to retard rusting.
（指机动车辆）有一层柏油或橡胶底材料的涂层用在下面防止生锈。
9.
all stainless steel, water-resistant, antimagnetic and shockproof
全不锈钢，防水、防磁、防震
10.
preservative lubricating oil
封存[防锈]润滑油
11.
Rust prevention terminology
GB/T11372-1989防锈术语
12.
Most effort to control corrosion involves coating the metal with an inactive substance.
大多数防锈措施都要给金属涂上一层不活泼的物质。
13.
Outside steel owns preferable corrosion protection capability.
*外罩钢件经脱脂，磷化及多层喷涂，具有良好的防锈腐蚀功能。
14.
Residual Stress Measurement and Numerical Simulation of Al_2O_3 Tritium Penetration Barrier on the Surface of 316L Stainless Steel;
316L不锈钢基材防氚渗透Al_2O_3涂层残余应力测试与数值模拟
15.
As an anticorrosive for non-immersed areas. Superstructure, topside, decks, stores, holds, engine room, etc.
作为非浸泡区域的防锈防腐保护层。适用于上层建筑、干舷、甲板、贮藏室、船舱、引擎室等。
16.
The machines must be well protected against dampness, moisture, rust and shock.
机器包装必须防湿、防潮、防锈、防震。
17.
As an antirust paint for new or existing ship hull and also as an antirust undercoat and primer for container.
主要用于新船或旧船的水线以下及以上部位的防锈涂层也可以用于集装箱的中间防锈漆及底漆。
18.
rust test for engine oil
内燃机润滑油防锈试验