1.
steering clutch release rocking lever
转向离合器开关摇臂杆
2.
The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by the push-rods.
气缸盖携带阀门，气门弹簧和在摇臂杆上的摇臂，这部分的气门传动机构通过推杆工作。
3.
Chassis design of a new type of lunar rover with a dual rocker-bogie and torsion bar
新型八轮双摇杆摇臂扭杆月球车悬架设计
4.
Install the push rods, rocker arms, pivots and bridges in the order they were remove
按照拆卸顺序安装推杆、摇臂、枢轴和桥臂。
5.
Remove the cotter pin and nut from the drag link at the pitman arm.
从转向拉杆上拆下转向摇臂处的开口销和螺母。
6.
Using Mathcad to analyze and calculate the track of bell-crank rocker type plate turnover machine
利用Mathcad求解双臂曲柄摇杆式翻板机运动轨迹
7.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"
8.
A guy running from the peak of a gaff or derrick to the deck.
科桁支索从桅上斜杆或摇臂吊杆的顶端拉到甲板上的牵索
9.
Install the engine cylinder head, push rods, rocker arms, bridges, pivots and engine cylinder head cover.
安装引擎汽缸盖、推杆、摇臂、桥、枢轴和引擎汽缸盖罩。
10.
"Essentially, the steering gear consists of two parts, a worm on the end of the steering shaft and a pitmanarm shaft on which there is a gear sector, toothed roller, or stud."
转向器基本上由两部分组成:装在转向轴末端的蜗杆和转向摇臂轴。
11.
"The gear sector, toothed roller, or stud meshes with the worm."
转向摇臂轴上装有扇形齿轮、带齿滚柱或指销,用以和蜗杆啮合。
12.
"This movement causes the pitman arm, attached to the sector, to swing to the right or left. This action, in turn, pushes or pulls on the tie rods attached to the pitman arm."
这一运动又依次推动或拉动与转向摇臂相连的转向直拉杆。
13.
Application of Swing Arm Tower Crane Erection Technology in 1000 kV UHV Double Circuit Steel Pipe Tower Construction
摇臂抱杆组塔技术在1000kV特高压双回路钢管塔施工中的应用
14.
universal raidial milling machine(horizontal)
万能摇臂铣床（卧）
15.
A gear sector is meshed with the worm gear; rotation of the worm gear causes the gear sector to rotate.
蜗杆齿带动齿扇转动,齿扇与蜗杆齿啮合,这使的与齿扇相连接的转向摇臂左右摆动。
16.
At present, the main front suspensions are of telescopic type and lever type, while the rear is of swing arm type.
目前前悬挂装置主要型式有伸缩管式和杠杆式,后悬挂装置主要型式是摇臂式。
17.
Many types of steering linkage have been made to connect between the steering knuckles of the front wheels and the pitman arm of the steering gear.
很多类型的转向连杆装置都是用来连接前轮转向节和转向器的转向摇臂的。
18.
hand-rocking universal woodworking circular saw
摇臂式万能木工圆锯机