1.
On the Manufacturing of the CBN-E306 Gear Pump Shell;
CBN-E306齿轮泵壳体的制造
2.
Analysis and Solution of the Pump Barrel Leak of Ethylene Delivery Pump
乙烯输送泵泵壳泄漏故障分析及改造
3.
Pump case are welded castings steel and steel plates.
泵壳是由铸钢与钢板焊接而成的。
4.
FINITE ELEMENT ANALYSIS FOR THE CASING OF A 1300 HP SINGLE ACTION TRIPLEX DRILLING PUMP
胜利1300马力钻井泵壳体的有限元分析
5.
Centerline discharge pump casings are not acceptable. The pump casing shall have an integrally cast hand hole supplied with a hand hole cover.
中心线排放泵壳是不可接受的。泵壳上应该具有整体铸造的探孔,并配置探孔罩盖。
6.
At the same time the authors evaluat the molding design of the pump shell castings.
同时对拟定的泵壳铸件工艺方案进行了评价。
7.
Analysis and Elimination of Sand Burning on Hydraulic Pump Case of Gray Cast Iron
液压泵壳体铸铁件粘砂的原因分析和对策
8.
Investigation on cooling of oxidizer pump case during coast period
高空滑行期间氧化剂泵壳体冷却方案研究
9.
Analysis ans Diagnosis of Main Source of Roundness error in Bore of Pump Case
泵壳内孔椭圆形误差主源的分析与诊断
10.
double-case vertical centrifugal oil pump
双壳体立式离心油泵
11.
double entry split casing centrifugal pump
揭壳式双进水口离心泵
12.
horizontal single-stage double-suction volute pump
卧式单级双吸蜗壳泵
13.
hydraulic oil pump driving device housing
液压油泵传动装置壳体
14.
3-D Turbulent Flow Calculation within a Centrifugal Pump Volute;
离心泵蜗壳内部三维湍流场数值模拟
15.
3-Dimensional Viscous Fluid Flow in a Volute of Centrifugal Oil Pump;
离心油泵蜗壳内部三维粘性流体流动
16.
Numerical Simulation Analysis of Flow Field in the Double Volute Centrifugal Pump
双蜗壳离心泵内部流场数值计算分析
17.
Study on the Performance of High-speed Partial Emission Pump Caused by the Shape of Volute
蜗壳形状对高速部分流泵性能的影响
18.
Research and implement on 3 - Dimension solid model of turbines casing of centrifugal pump based on MDT
基于MDT的离心泵蜗壳三维造型研究与实现