1.
pepe stock and dies
管子丝攻和螺丝钢板
2.
tap and die set
全套螺丝攻和螺丝板牙
3.
gas stocks and dies
煤气管螺丝板牙和扳手
4.
taps dies and tools
螺丝攻、车刀、模具
5.
An apparatus for holding the dies that cut threads on screws, bolts, pipes, or rods.
板牙铰手一种用来夹持切削螺钉、螺柱、钢管或拉杆上螺纹的螺丝模的装置
6.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
7.
Remove the fender top, front and the rear screws.
拆下挡泥板顶部、前部和后部螺丝。
8.
a tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods.
装在螺丝攻里用来切割螺丝钉、螺栓、管具或棒类的多余的螺旋的工具。
9.
Had better use nickel-plating screw or stainless screw and waterproof glue to install the material.
（五）最好使用镀镍螺丝钉、锈钢螺丝钉和防水胶水安装。
10.
Check drain valve to make sure that it is closed.
把四个前面板螺丝和两个顶部法兰上的螺丝卸下来。
11.
scratch(ing) brush
钢丝刷, 金属丝刷子
12.
Remove Forcing Screw 6960-4, Step Plate 8140–2, and Threaded Adapter 8140-
拆下加固螺丝6960-4、踏板8140–2和螺纹接头8140-1。
13.
"When threading pipe, gauge pipe threads for size and length to avoid jamming pipe against seat and disc."
当对管道进行攻丝时,要测定管道螺纹的尺寸和长度,避免将管道塞满阀座和阀瓣。
14.
A Comparative Study on the Effect of the Self-tapping and the Nonself-tapping Pedicle Screw;
自攻丝与非自攻丝椎弓根螺钉性能的对比研究
15.
bright mild steel hexagonal nut
光亮软钢六角螺丝帽
16.
bright mild steel round head wood screw
光亮软钢圆头木螺丝
17.
nickel-plated mild steel round head wood screw
镀镍低碳钢圆头木螺丝
18.
brass-plated mild steel round bead wood screw
镀黄铜圆头软钢木螺丝