1.
overhead cam shaft
上凸轮轴上部凸轮轴
2.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
3.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
4.
overhead camshaft engine
上置式凸轮轴发动机
5.
The cam may have three, four or six lobes.
该凸轮上有3个，4个或6个凸缘。
6.
Design and Dynamic Simulation of Cam Automatic Feeding System for Assembled Camshaft
装配式凸轮轴凸轮上料系统设计及动力学仿真
7.
As the camshaft continues to rotate, the high spot moves way from the valve mechanism.
因为凸轮轴继续旋转，凸轮轴上的凸起部分离开气门装置。
8.
Install a new cam bolt, cam and new nut in the axlRe-align the reference marks.
在轴上安装新凸轮螺栓，凸轮和 新螺帽。重新校准参考标记。
9.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
10.
Loosen setscrews 2 in the vertical driving cam.
拧松上下传送凸轮的固定螺丝2。
11.
program cam contact
程序鼓凸轮接点-卡片穿孔机上的
12.
a flat disk placed to prevent leakage.
装上防泄露的扁平凸轮盘。
13.
The adjusting screw rests on the high step of the cam.
调节螺钉落在凸轮高点上。
14.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
15.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
16.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
17.
Application of Biconvex Cam Sine Acceleration Framework in Metallic Roller Printing Equipment
双凸凸轮正弦加速度机构在金属筒体印花设备上的应用
18.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置