1.
Large eddy simulation of turbulent flow in a square duct with 180° bend
180°方形弯管中湍流流动的大涡模拟
2.
lazy-S umbilical
低弯度s形控制管缆
3.
steep-S flexible riser
高弯度S形挠性立管
4.
Forms of quality defects of bending pipes made on bending machine and the solution to it
弯管机上弯管质量的缺陷形式及研究对策
5.
A U-shaped bend in a river.
牛轭形河里的一种u形的弯管
6.
To make or form an offset in(a wall, bar, or pipe).
做弯曲使在（墙、杆或管子）上形成壁阶或弯曲
7.
The Influence of Cold-Formed Effect to Stress Capacity Performance of Cold-Formed Rectangular Hollow Section Beams;
冷弯效应对冷弯矩形钢管梁受力性能的影响
8.
Experimental Study and Simulation on Laser Bending of Tubes;
管材激光弯曲成形的试验与模拟研究
9.
Simulation of cold roll-bending of square pipe based on a secondary development from ANSYS software
基于ANSYS二次开发方矩形管辊弯仿真
10.
The Research on Forming Processes of Titanium Ring Pipe with Higher Strength
高强钛合金环形管热推弯曲工艺研究
11.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺
12.
The Establishment of the Finite Element Model for Spiral Tube
螺旋盘管弯曲成形有限元模型的建立
13.
Study on spring-back compensation for non-plane tube bending process
非平面弯管成形过程的回弹补偿研究
14.
Numerical Simulation of Wrinkling for Rotary Draw Bending Process of Thin-walled Rectangular Tube;
薄壁矩形管绕弯成形失稳起皱的数值模拟
15.
Influence of Material Parameters on Rectangular Tube Cross Section Deformation in Rotary-draw Bending Process
材料参数对矩形管绕弯截面变形的影响
16.
Strength Deformation Behaviour of Circular Concrete Filled Steel Tubes Subjected to Pure Bending
纯弯作用下圆形钢管混凝土的强度变形性能
17.
Shaping Ability of Nickel-titanium Instruments in Curved Root Canals Preparation;
镍钛根管预备系统预备弯曲根管的成形效果
18.
Width-thickness ratio of steel plates in concrete-filled rectangular thin-walled steel tube columns subjected to axis force with initial bending
考虑初始弯曲矩形薄壁钢管砼柱管壁屈曲分析