1.
manual valve positioner
手动阀定位机构手动阀反馈装置
2.
Development of the Flexible Positioning Pneumatic Manipulator Based on the Common Cylinder Controlled by the Pneumatic Proportional Valve
基于比例阀控普通缸的柔性定位气动机械手的研制
3.
Internal stops provide positive over travel protection for power actuated valves and act as a reference to position the discs in the open and closed positions.
内置的止动装置为动力执行机构提供行程保护，并且作为参考坐标在开启和关闭位置定位阀瓣。
4.
The regulating handle consists of manoeuvring valve pos. no.01 and handle mechanism.
调节手柄由操纵阀01和手柄机构组成。
5.
All valves are available with hand-wheels, gearing, electric motor actuators or pneumatic or hydraulic cylinder actuators.
所有阀门都可配置手轮，齿轮操作机构，电动马达执行机构，或者气动或液动缸体执行机构。
6.
Pneumatic valves regulate the pneumatic enforcement agencies and regulatory valves two.
气动调节阀由气动执行机构和调节阀两部组成。
7.
Oxygen control valves consist of valve, actuator and accessories.
氧气调节阀由阀门,气动执行机构及附件组成.
8.
Motion uncertainty analysis for reheat-stop-valve mechanism in high temperature environment
高温环境下再热主汽阀机构运动性能不确定性分析
9.
The latch plate permits the valve to be locked in any of the10 positions on DIT handles or in any position on IOL handles.
DIT手柄上的插销板使得阀门能够在十个位置上锁定；而IOL手柄则可以在任何位置锁定阀门。
10.
ON DESIGN RESEARCH OF AUTOMATIC REVERSING MECHANISM OF RECIPROCAL COMBINATION VALVE;
往复组合阀自动换向机构的设计研究
11.
When the handwheel is rotated to the closed position the upper stem pushes on the diaphragms, which deflect downward, forcing the lower stem against the valve seat.
当手轮旋转到关闭位置，上阀杆推动横膈膜，横膈膜下垂，迫使下阀杆接触阀座。
12.
When the handwheel is rotated toward the open position the upper stem is moved away from the diaphragms allowing the spring to push the lower stem away from the seat.
当手轮象开启位置旋转时，上阀杆离开横膈膜，弹簧推动下阀杆离开阀座。
13.
The Dynamic Modeling and Simulation of Intelligent Pneumatic Valve Positioning System
智能气动阀门定位系统的动态建模与仿真
14.
Air filtering pressure reducing valve, solenoid valve, valve location feedback device, valve gate locator, quick exhaust valce.
空气过滤器减压阀，电磁阀，阀位反馈装置，阀门定位器,快速排气阀。
15.
The valve's seat is at the opposite end from the handle.
阀门的阀座位于手柄对面的另一端。
16.
A novel integral handle reversal valve of wheel loader
一种轮式装载机整体式新型手动换向阀
17.
The Research and Applications of a Simplified Accurate Positioning Pneumatic Manipulator;
简易型精确定位气动机械手的研究及其应用
18.
Research on Orientation of Mobile Manipulator End-effector Based on Multi-Source Information Fusion
基于多源信息融合的移动机械手末端定位研究