1.
diaphragm between crankcase top and cylider liner
曲国同箱顶和汽缸衬筒间隔板
2.
backgrey seam impression
印花衬布接缝痕(滚筒印花疵点)
3.
The roller in a typewriter that serves as the backing for the paper against which the type bars strike.
滚筒打字机中当作纸的衬垫物由打字棒击纸的滚筒
4.
A bushing or similar lining for a bearing, made from a copper alloy.
铜套或铜衬垫用铜合金制的轴承轴瓦或套筒式衬垫
5.
Reason Analysis of Bolt Breakdown Failure in Steel Ball Pulverizer Body and the Sheath Plate Reformation
钢球磨煤机筒体断螺栓原因分析及衬板改造
6.
Reform of ball mill shell liner distribution and connecting type
球磨机筒体衬板布局及连接方式的改造实践
7.
Packing gauge: A measuring instrument which is used to determine the space between plate, or blanket, and the cylinder bearers and thus, the amount of packing needed.
衬垫厚度计:测量仪器。用来测量印版,胶布和圆筒肩铁间的空位,因此而决定衬垫所需的厚度。
8.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼,并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
9.
lining cartridge, for sporting, hunting or target-shooting ammunition (excl. that for shotguns)
运动枪、猎枪或射击练习枪弹药筒内衬(不包括滑膛枪)
10.
Make a narrow tube to fit over the boning from lightweight lining. Inert the boning, and finish the open end.
用薄的衬里缝制一个窄的直筒装羽骨。塞进羽骨,封住两端。
11.
(2) Part of the make ready process when the cylinders are packed to change the degree of impression or the print length of the final image.
(2)印刷作业准备的一个程序。把圆筒作适当的包衬,使它变更压力或印纹的长度。
12.
Sleeve 1;Sleeve 2;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;螺纹套筒 1;螺纹套筒 2
13.
Based on the analyses of the structural feature and the requirements of functions of the composite bottle cover of the new kind,two fundamental components,the lining washer and the outer body,are abstracted into a plate and a cylinder with thin wall,respectively.
基于新型组合瓶盖的结构特点和功能分析,将该组合体基本件衬垫和外体抽象为薄板和薄壁圆筒.
14.
Sleeve 1;Sleeve 2;Sleeve 3;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;套筒 3;旋拧套筒 1;旋拧套筒 2
15.
laboratory dryig cylinder
试验室用烘筒,小烘筒
16.
multiple buoys mooring
多浮筒锚泊多浮筒系泊
17.
automatic cone winder
自动锥形筒子络筒机
18.
The drum of a capstan.
滚筒绞盘的圆筒状物。