1.
"Towards the outside, the rock is cool and hard. "
靠近地表是冷却硬化的岩石。
2.
steel that has been hardened by immersing it in water or oil to cool it.
浸入水或油中冷却硬化的钢。
3.
having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.
有软化或熔化的特性，当加热时变软、冷却时变硬。
4.
The process of cooling is called quench .
这种冷却过程叫做淬硬。
5.
The jelly will stiffen as it cools.
果冻冷却后会变硬。
6.
The Basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to harden when cooled.
注射成型的基本概念是使热塑性材料在受热时熔融,冷却时硬化。
7.
To harden the surface or case of(iron or steel) by high-temperature shallow infusion of carbon followed by quenching.
表面渗碳硬化法通过高温条件下对碳的浅层注入并紧接冷却来使（铁或钢的）表面或外壳硬化
8.
Structure optimization of water cooling channel of cast steel stave
高炉铸钢冷却壁冷却水管的优化研究
9.
harden by reheating and cooling in oil.
通过重新加热并在油中冷却来使变硬。
10.
The metal hardened when it was cooled in the air.
金属在空气中冷却时变硬。
11.
quench hot steel to harden it
用水冷却烧热的钢使其坚硬
12.
Thermoplastics: Materials which have the property of softening repeatedly on the application of heat, and of hardening again on cooling. Molecules of thermoplastics take the form of long chains.
热塑性物料:能重复的因受热而软化，冷却而硬化的物料。这些物料的分子是链状结构。
13.
Here, the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated.
熔体在模腔里冷却,硬化,直至完全固化。然后将模子打开,推出工件,并重复以上工序。
14.
boiling heavy water cooled and moderated reactor
沸腾重水冷却慢化堆
15.
graphite moderated sodium cooled reactor
石墨慢化钠冷却反应堆
16.
BGR (Bismuth-Graphite Reactor)
石墨慢化铋冷却反应堆
17.
Numerical simulation on the effect of variety of cooling flux on cooling efficiency
冷却流量变化对叶栅冷却效果影响的数值模拟
18.
a material that softens when heated and rehardens when cooled.
一种加热后变软、冷却后重新变硬的材料。