1.
Gland– two piece gland bushing/ packing flange is self-aligning to prevent stem damage for cocked gland.
填料压盖-两件式填料压盖衬套/料法兰能够自动校准，以防止由于填料压盖翘起造成阀杆损坏。
2.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
3.
Pressure Calculation of Powder Gas in Bush Radial Clearance
衬套径向间隙部位火药气体压力计算
4.
Tighten leaf spring press until bushing is extracted from leaf spring.
上紧叶片弹簧加压机直到衬套被拔出叶片弹簧。
5.
Sintered metal bushes--Determination of radial crushing strength
GB/T6804-1986烧结金属衬套径向压溃强度测定法
6.
The portion of a garment that covers the lap.
下摆外套下部压住膝盖的部分
7.
Backseat– machined bonnet stem bushing provides back-up stem seal.
(10) 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。
8.
Backseat– machined bonnet backseat provides back-up stem seal.
(9) 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。
9.
Backseat ? machined bonnet stem bushing provides back-up stem seal.
后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。
10.
The bush of the middle frame is a main part of the machine to produce oxygen bottle in a high pressure container factory.
“中模架衬套”是高压容器厂生产氧气瓶设备的主要配套构件。
11.
Core-Pulling Structural Analysis and Hydraulic Core-Pulling Design for Bushing-Type Parts Die-Casting Die
衬套类零件压铸模抽芯结构分析及其液压抽芯设计
12.
fitting rubber liner for stern tube
尾轴管橡胶衬套嵌套
13.
A fixed or removable cylindrical metal lining used to constrain, guide, or reduce friction.
衬套，套管一种固定或可移动的圆柱形金属套管，用来压紧、引导或减小摩擦
14.
This paper introduced the only spinning method for the cone bush of a outsize shape.
对特大形状的锥形衬套唯一采用旋压方法进行了介绍。
15.
Analysis of Small End Bushing and Crosshead Pin Failure of Fresh Hydrogen Compressor Connecting Rod in Hydrocracking Unit
加氢裂化新氢压缩机连杆小头衬套与十字头销烧损原因分析
16.
Preparation and Axial Compressive Property of Small Size Thin-Wall High Temperature GFRP Bush
小尺寸薄壁耐高温玻璃钢衬套的制备及其轴向压缩性能
17.
Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.
连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。
18.
percolised hose
衬里渗透水带衬里和覆盖层