1.
Research on Testing Elastic-Plasitc Fatigue-Thermal Deformation Around the Hole
孔周高温弹塑性疲劳变形的检测研究
2.
Study on Low Cycle Fatigue Deformed Structure for Titanium Alloy BT9
钛合金BT9低周疲劳变形结构的研究
3.
Fatigue Deformation and Fracture Behavior of Extruded AZ81 Mg Alloy;
挤压变形AZ81镁合金的疲劳变形及断裂行为
4.
Research on Low-cycle Fatigue Behavior of Extruded 6061 Aluminum Alloy
挤压变形6061铝合金的疲劳变形及断裂研究
5.
Fatigue Behavior of Extruded Al-Mg-Si-(RE) Alloys;
挤压变形Al-Mg-Si-（RE）合金的疲劳行为
6.
Compared with non-deformation steel,the fatigue stress of 1Cr18Ni9Ti austenitic stainless steel after 60% cold deformation is raised about 1.65 times.
经60%变形后,钢的疲劳强度提高了65%左右。
7.
Cyclic Deformation Behavior and Fatigue Damage Mechanism of Copper Bicrystals;
铜双晶体的循环变形行为与疲劳损伤机制
8.
Influence of Heat Treatment on Fatigue Behavior of Extruded Al-Mg-Ce Alloy;
热处理对Al-Mg-Ce变形铝合金疲劳行为的影响
9.
Study on the Cold-Hot Deformation and Laser Thermal Fatigue of IN718 and 1100 Aluminum Alloy;
IN718和1100铝合金冷热变形及激光热疲劳研究
10.
Multiaxial Ratcheting Deformation and Low Cycle Fatigue of Lead-free Solder Sn-3.5Ag;
无铅钎料Sn-3.5Ag多轴棘轮变形与低周疲劳研究
11.
Fatigue Behavior of Two Extruded AM Series Magnesium Alloys
两种挤压变形AM系列镁合金的疲劳行为
12.
Plastic Deform Effect on High Cycle Fatigue Behavior of AZ31 Magnesium Alloy
塑性变形对AZ31镁合金高周疲劳性能影响的研究
13.
Low-Cycle Fatigue Behavior of Extruded Al-Mg-Si-RE Aluminum Alloy
挤压变形Al-Mg-Si-RE铝合金低周疲劳行为研究
14.
Deflection of a composite steel-concrete beam subjected to a fatigue load
钢-混凝土组合梁在疲劳荷载作用下的变形计算
15.
Research on Numerical Simulation and Structural Fatigue Life for Esophagus Stent
食管支架变形数值模拟与疲劳寿命的分析研究
16.
Calculation of Dynamic Stress and Fatigue Strength of Crankshaft with Bush Deformation Included
计入轴瓦变形的曲轴动应力和疲劳强度计算
17.
LOW-CYCLE FATIGUE BEHAVIOR OF AS-EXTRUDED Mg-x%Al-3%Ni ALLOYS
挤压变形Mg-x%Al-3%Ni合金的低周疲劳行为
18.
The different kinds of material deformation (elasticity, plasticity, fracture, creep, fatigue) are explained in detail.
不同种材料的变形（弹性，塑性，断裂，蠕变，疲劳），详细解释了。