1.
detachable plate
隔舱壁上装的可移式铁门可拆板
2.
DEMOUNTABLE FRONT BUMPER, impact resistant 6mm steel plate.
可拆卸的前保险杠：耐6毫米钢板的冲击。
3.
Engineering Design Method for the Circular-shaped Cover of the Detachable Spiral Heat Exchanger(DSHE)
可拆螺旋板式换热器大平盖工程设计方法
4.
Remove left cowl side trim panel.
拆下左仪表板侧装饰板。
5.
The sealing disk may be removed, if necessary, by removing the screws connecting the keeper plate to the clapper.
如果有必要的话，可以通过拆卸将阀瓣连接到承座压板的螺丝来拆卸密封阀瓣。
6.
Service pipe under floor not acceptance except water drainage.
柜门后背板可用简单工具方便地拆卸下来以检修管路系统。
7.
Finite Element Analysis and Experimental Investigation about the Structure and Heat Transfer of Detachable Spiral Heat Exchanger;
可拆式螺旋板换热器结构和传热的有限元分析与实验研究
8.
Research on the Disassembling Methods and Force for Electronic Components on PCBs
电路板元器件拆卸方法及拆卸力研究
9.
Disassembly Technology and Disassembly Process of Waste Printed Circuit Boards:a State-of-the-art
印制电路板拆解技术与拆解工艺综述
10.
Remove the lamp from the hood inner panel.
由引擎罩内板将灯拆卸。
11.
Remove B-pillar upper trim panel.
拆卸B-柱上部饰板。
12.
Remove the trim panel from the front door.
从前车门上拆卸饰板。
13.
Remove the fender lower screws.
拆下挡泥板下螺丝。
14.
Remove upper fixed column shrou
拆卸上部固定柱围板。
15.
Remove C-pillar and quarter trim panel.
拆去C柱和三角饰板。
16.
Remove the door module from the trim panel.
从饰板上拆卸车门模组。
17.
Instrument Panel End Cap Remove/Install
仪表板端盖拆卸/安装
18.
Instrument Panel Top Cover Remove/Install
仪表板上盖的拆卸/安装