1.
To harden the surface or case of(iron or steel) by high-temperature shallow infusion of carbon followed by quenching.
表面渗碳硬化法通过高温条件下对碳的浅层注入并紧接冷却来使（铁或钢的）表面或外壳硬化
2.
To treat, combine, or impregnate with carbon, as when casehardening steel.
使渗碳，碳化使与碳一起处理，使与碳混合或使充满碳，如将钢的表面粹火硬化
3.
"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."
使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢的表面粹火硬化.
4.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
5.
Effect of Surface Brightening Methods on the Morphology and Corrosion Resistance of Plasma Carburized Stainless Steel
不锈钢离子渗碳后表面亮化处理方法对渗层形貌和性能的影响
6.
Microstructure and Hardness of Cr,B,C Ternary Cast-infiltrated on 45 Steel Surface
45钢表面铬、硼、碳三元铸渗层的组织和硬度
7.
The case-hardening or carburizing process is in wide use.
表面淬火或渗碳法应用十分广泛。
8.
Research of Middle Temperature Chromizing on Carbon Steel with Double Glow Plasma Surface Alloying Process and Carbon Migration in the Chromized Layer;
碳钢表面中温双辉等离子渗铬合金化及渗层中碳迁移的研究
9.
Electrochemical Brightening Process Optimization of Plasma Carburized Stainless Steel
离子渗碳不锈钢表面电化学亮化工艺的优化
10.
The Carbonation of Carbon Source and its Choice in the Carbon Coating Treatment of LiFePO_4
LiFePO_4表面碳包覆方法中碳源的碳化及碳源选择
11.
Refinement mechanicm of cementite phase in the process of surface nanocrystallization of 38CrSi steel
38CrSi合金钢表面纳米化中渗碳体相的细化分析
12.
A Study on the Plasma Electrolytic Nitrocarburising Treatment for Steels Surface;
液相等离子体法钢材表面碳氮共渗处理的研究
13.
Research on Structure and Properties of Alloyed Layer by Cast Penetrating on Medium Carbon Steel Surface
中碳钢表面铸渗合金化层组织和性能研究
14.
liquid carbonitriding
液体碳氮共渗, 液体渗碳氮化法
15.
Double Glow Plasma Low Temperature Surface Chromizing Hardening Process of T10 Steel
T10钢低温双辉等离子表面渗镀铬硬化的研究
16.
INVESTIGATION OF THE ACCURATE CONTROL ABOUTSURFACE CARBON CONCENTRATION OF CARBURISING PART
渗碳零件表面碳浓度精确控制的探讨
17.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
18.
The Influence of Medium and Low Carbon Surface Nanocrystallization to Low Temperature Gas Nitriding;
中低碳钢表面纳米化对低温气体渗氮行为的影响