1.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
2.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
3.
Automobile Vehicle Bridge Stiffener Ring, Rear Cover Welding Apparatus and Control;
汽车车桥加强环、后盖焊接设备及控制
4.
Welding procedure and quality control for roofs of type HX_D1 locomotive
HX_D1型机车顶盖焊接工艺及质量控制
5.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
6.
ANALYSIS AND WELDING REPAIR OF CRACKS IN A NEW TYPE PUMP BONNET
新180泵头盖裂纹分析及焊接修复
7.
The etched section also reveals that multiple weld passes were made over the top of the original submerged arc weld pass.
从酸蚀断面还可以看出：在原自动埋弧焊的上面覆盖有多层焊道。
8.
Standard test method for solderability of metallic-coated products
GB/T16745-1997金属覆盖层产品钎焊性的标准试验方法
9.
Stress Analysis on a Spherical Cap Joining the Flange Ring by Welding and Discussion on GB150
焊接法兰球面盖的应力分析与标准讨论
10.
New FE modeling approach to spot welding joints of automotive panels and applications
车身覆盖件点焊结构虚拟节点建模及应用
11.
Welding residual stresses of cover-plate retrofitted steel moment connections
梁柱刚接节点盖板加固的焊接残余应力分析
12.
Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.
连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。
13.
A protective plate covering the human face, as of a welder or diver.
面罩盖在人脸上的保护罩，如熔焊工人的或潜水员的
14.
The Designing and Technology of High-frequency Inducing Brazing Equipment for End Cap of Electromagnetic Change Valve
电磁换向阀端盖高频感应钎焊设备研制及工艺探讨
15.
Application of Laser Welding in Truck Cab Roof Panel Flexible Manufacturing
激光焊接技术在载货车驾驶室顶盖柔性制造中的应用研究
16.
Redesign of Cowl-Top of Car on the Characteristics of Laser Tailor Welded Blanks;
基于激光拼焊板特征的轿车前围上盖板再设计研究
17.
Study on hardfacing technology of die insert and its economic analysis
大型覆盖件镶块模具的堆焊工艺及经济效益分析
18.
Second we have a small unit with10 hydraulic cutting press and50 automatic oil lubrication stitching machines where we manufacture our products under our own control and observation.
我们是质量安全产品手套服装、子、子盖子、盖和安全焊接夹克神志清楚的制造者和出口商。