1.
Development of Dynamic-torque Measure System Based on the Cam-turn-angle of Diesel Fuel Pump
基于凸轮轴转角的油泵瞬态扭矩检测系统的研制
2.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
3.
overhead cam shaft
上凸轮轴上部凸轮轴
4.
As the camshaft continues to rotate, the high spot moves way from the valve mechanism.
因为凸轮轴继续旋转，凸轮轴上的凸起部分离开气门装置。
5.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
6.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
7.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。
8.
The ratio of the crankshaft to the revolutions of the camshaft is 2∶1.
曲轴的转速与凸轮轴的转速之比是2∶1。
9.
This means that the crankshaft will make two revolutions for every revolution of the camshaft.
这意味着凸轮轴每旋转一次曲轴将旋转两次。
10.
As the camshaft rotates, the lobe, or high spot of the cam, pushes against parts connected to the stem of the valve.
当凸轮轴旋转时，凸轮凸起的或者高点的位置，推动气门座。
11.
cam shaft displacement control for reversing engines
可倒转发动机的凸轮轴位移控制器
12.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
13.
cam shaft drive
凸轮轴传动凸轮轴传动装置
14.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
15.
But a camshaft driven directly by the crankshaft gear turns in the opposite direction.
但是凸轮轴被曲轴齿轮直接驱动，其将在相反方向上转动。
16.
Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct.
停止：出力轴停止旋转，凸轮滚子接触滚子轴承式凸轮锥度支撑肋的重直部分。
17.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
18.
The cam is an egg-shaped piece of metal on a shaft that rotates in coordination with the crankshaft.
凸轮是一在轴上的蛋形的金属，通过曲轴协调旋转。