1.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
2.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
3.
double-studded flange
双头螺栓连接的法兰
4.
boiler band joining eye bolt
锅炉带圈连接眼螺栓
5.
studded-flange connection
带柱螺栓的法兰连接
6.
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3632-1995钢结构用扭剪型高强度螺栓连接副
7.
eye with stud connections, of iron or steel for insulator chains
带双头螺栓连接器的眼,钢铁制,用于绝缘子串
8.
Note- threads connecting to microscope are male.
注意：连接显微镜的螺栓是外螺纹。
9.
Bolted joints can be readily disassembled and reassembled; hence Bolts or screw fasteners are used more than other types of mechanical fastener.
螺栓连接易于装、拆;因此,螺栓或螺纹件紧固件较其它机械扣件用得更广。
10.
"Bolt: Mechanical fastener, usually used with a nut, for connecting two or more parts."
螺栓:通常与螺母一起用于连接两个或更多零件的机械紧固件。
11.
Cable connections are made to the side of the battery by means of threaded bolts into "cast-in-lead" stainless steel nuts.
在蓄电池一侧，利用螺栓拧到“镶铸铝”的不锈钢螺帽上进行馈线连接。
12.
During casting internal and external formwork are conneced together using tie forms, n.2 bars diam.15 mm every1.5 m.
浇注混凝土过程中，内模，外模用穿墙螺栓连接，每1.5米设15毫米螺栓2条。
13.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
14.
The Statistical Distribution of Bolt-Hole Clearance in Bolt Joints;
螺栓连接件中栓孔间隙分布规律的研究
15.
Install the bolts attaching the end cap to the front fender.
安装连接末端端盖到前挡泥板的螺栓。
16.
Analysis of pivot bolt breaking for water gate of Xinqiao ship lock
新桥船闸闸门支铰连接螺栓断裂分析
17.
The Replace and Quality Supervision for the Bolt of the Steel Rigid Frame Node;
钢架节点连接螺栓的代换及质量监督
18.
Reached on Mechanics Action of Converter's Self-adjusting Bolt Connection
转炉自调螺栓连接装置力学行为研究