1.
aperture atomizer
喷孔式喷油嘴喷雾器
2.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
3.
A perforated nozzle for spraying water from a hose or sprinkling can.
莲蓬式喷嘴一种使水从管子或喷水壶里喷洒出来的有孔的喷嘴
4.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
5.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
6.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
7.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
8.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
9.
diameter and number of hole
喷嘴量孔孔径及数目
10.
high pressure nozzle spray drier
高压喷嘴式喷雾干燥机
11.
atomized spray injectior
(喷注器) 雾化式喷嘴
12.
injector hole area
喷嘴孔的通过截面面积
13.
Research about Nozzle Discharge Speed Distribution for Meltblown Model
熔喷模头喷嘴孔流场速度分布的研究
14.
ISA 1932 nozzle
ISA 1932喷嘴
15.
In respect of flexibility of regulating injection characteristics, the electronic unit injector is much better than that of traditional pump-pipe-nozzle system.
而在喷射特性调节的灵活性方面，共轨蓄压式电控泵喷嘴较传统的泵-油管-喷嘴系统有明显改善。
16.
In order to develop a new type of oil supplying system to replace the traditional pump-pipe-nozzle system, the injection characteristics of common rail accumulator electronic unit injector are studied.
研究共轨蓄压式电控泵喷嘴系统的喷射特性，取代传统的泵-油管-喷嘴系统。
17.
Study on the Fuel Injection Rate of a Multi-hole Injector Applied to a Direct Injection Gasoline Engine
直喷汽油机多孔喷油器的喷油规律研究
18.
Remove injector(s) from fuel rail.
从燃油轨道上拆卸喷嘴。