1.
Experimental Investigation on Flow Field Around Blade-tip Airfoil Section of Horizontal-axis Wind Turbine
水平轴风力机叶尖翼型截面流场的试验研究
2.
Abstract: A model of self-excited ae rodynamic forces acting on a sectionof bridge deck with additional surface atta ched below the trailing edge is established.
文摘:首先建立了下风侧附加翼板桥梁主梁截面的自激气动力模型。
3.
Multiple objectives optimization of hingeless rotor tapered box-beam blades based on aeroelastic stability
无铰旋翼变截面盒型梁桨叶气弹动力学多目标优化
4.
Elastic buckling of web restrained by flanges in I-section members
考虑翼缘约束的工字形截面腹板的弹性屈曲
5.
Rectification of computation method for section efficiency index of T beam with wet joint in web plate
翼板湿接T梁截面效率指标计算方法修正
6.
RESEARCH ON LOCAL BUCKLING OF LIPPED H-SECTION MEMBERS
卷边翼缘工形截面构件的局部稳定性能
7.
LATERAL STABILITY BEHAVIOR OF LIPPED H-SECTION BEAMS SUBJECTED TO MOMENTS
卷边翼缘工形截面梁的稳定性能及设计方法
8.
Fast Approximate Analytical Method of Wing Cross-section Distributed Loading
机翼截面分布载荷及节点分配的快速近似方法
9.
crosssection estimate in dynamic model
动态模型的截面估计
10.
Aerodynamic Characteristic Computations on Iced Airfoils、Multi-Element Airfoil and Rudder;
结冰后翼型、多段翼型及舵面的气动特性计算
11.
Study on the Cross-section and Oblique-section of Steel Reinforced Concrete Short-leg Shear Wall;
型钢混凝土短肢剪力墙正截面斜截面分析
12.
The Limit Value of Axial Compression Ratio of Reinforced Concrete Special-Shaped Columns;
T形、十字形截面柱翼缘对轴压比限值影响的讨论
13.
LOAD-CARRYING CAPACITY OF LIPPED H-SECTION MEMBERS UNDER AXIAL LOAD
卷边翼缘工形截面构件在轴心压力作用下的稳定承载力研究
14.
THE EFFECTIVE FLANGE WIDTH OF BEAM SUPPORT SECTIONS IN CAST-IN-SITU FLOORS UNDER VERTICAL LOADS
竖向荷载下现浇楼盖中的梁支座截面有效翼缘宽度
15.
Experimental Research and Analysis of Effective Flange Width of Beam End Section in Cast-in-Situ Concrete Frames
现浇混凝土框架梁端截面有效翼缘宽度的试验研究与分析
16.
In this regard, several airfoil templates are given based on existing designs, eg, the SD7037 airfoil and others.
在这方面,有几个版本,基于现有翼型设计,例如,sd7037翼型等.
17.
"Airfoil: Shaped surface, such as an airplane wing, tail, or propeller Blade, that produces lift and drag when moved through the air."
翼型:在空气中运动时能产生升力和阻力的型面,如机翼、尾翼或螺旋桨桨叶。
18.
THE SPECIFIC SECTION COEFFICIENT AS A CRITERION FOR ESTIMATING THE UTILIZATION OF METAL FOR STEEL SECTIONS IN THE SHIPBUILDING INDUSTRY
用比截面系数作为衡量船用型钢截面金属利用的指标