1.
Additional Error Analysis of 500kV CVT Dielectric Loss testing in Non-Open Wire case
不拆线测试500kV CVT介损的附加误差分析
2.
Study on temperature additional error of LSIII flange transmitter
初探法兰变送器温度附加误差的计算
3.
If gauges are used in the following circumstances, additional device should be installed, but additional error is not allowable, otherwise amend should be done.
仪表在下列情况使用时应加附加装置，但不应产生附加误差，否则应考虑修正。
4.
The particular features of the scheme are fewer order of corrections and that smaller error is introduced by rationalization.
此方案的特点是修正阶数少、有理化附加误差较小。
5.
An Analysis about Metering Additional Errors of Standard Orifice Plate Flow-meter in Measuring Natural Gas Flow-rate
标准孔板流量计测量天然气流量计量附加误差分析
6.
A Study of Additional Functions in Non rigid Body Model for Error Compensation of CMMs
坐标测量机非刚体误差补偿模型中附加函数的研究
7.
Appended a list of errors to the report.
在报告中附加一勘误表
8.
An unexpected error has occurred. Your attachments cannot be added or removed.
出现意外错误。无法添加或删除附件。
9.
Method of radio wave refraction error correction based on 0 deg and its nearby elevation angles
0度及其附近仰角的电波折射误差修正方法
10.
alignment error
安装误差;调准误差;定线误差;校正误差;校直误差
11.
Grey Error Amended Modeling for Thermal Error of the Spindle in Machining Center
加工中心主轴热误差的灰色残差修正模型研究
12.
There are many factors influencing the errors of mechanical process.
影响机械加工误差的因素有多种。
13.
When you calculate the problem, the errors should be added in.
当你计算这道题时，应该把误差加进去。
14.
Research on Generating Method and Error Compensation for Digital Gear Tooth Surfaces;
数字化齿面展成加工及误差补偿研究
15.
Modeling and Compensation of NC Milling Machine Mould Machining Error;
数控铣床模具加工误差的建模与补偿
16.
Design and Research on the System of Gear-grinding Machining Errors and Compensation;
磨齿加工误差补偿系统的设计与研究
17.
Restarted Simpler GMRES Augmented with Approximate Errors;
添加近似误差的重新启动的simpler GMRES算法
18.
The Study of CAD & Processing Error for End-Gear with Arc Tooth;
端面弧齿盘CAD及加工误差的研究