1.
Throttle Position Sensor Mounting Screws
节气阀位置感知器固定螺丝
2.
Air filtering pressure reducing valve, solenoid valve, valve location feedback device, valve gate locator, quick exhaust valce.
空气过滤器减压阀，电磁阀，阀位反馈装置，阀门定位器,快速排气阀。
3.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。
4.
manual valve positioner
手动阀定位机构手动阀反馈装置
5.
no-flow position
中间位置(调节系统中滑阀的位置)
6.
Tag location for gate and globe valves is typically on the valve yoke or body/ bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/盖法兰上。
7.
Research and Analysis of Valve Position Indicator
船用阀门位置指示装置的研究与分析
8.
The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting.
主阀轴配置一个内轴，适用于双重调节止动记忆和阀门位置设置。
9.
Servo valves consists of feedback - electric-hydraulic servo valve and position feedback servo valves.
伺服阀主要分为力反馈式电液伺服阀和位置反馈式伺服阀.
10.
The PCV valve sticks in the open, maximum-flow position.
把PCV阀固定在开启位置即最大流量位置。
11.
Throttle Body and Sensor Locations—Engine
节气阀体与感知器位置—0L引擎
12.
Solenoid Switch Valve Latched in TCC Position
电磁螺线管开关阀门固定在ＴＣＣ位置
13.
Turn handle to be perfectly perpendicular to valve body.
将手柄旋转到与阀体完全垂直的位置。
14.
Study on Electro-Servo System Controlling Position of Valve Used in the Industrial Furnace;
工业炉用电液阀门位置控制系统研究
15.
Pneumatic Proportional Valve-cylinder Position Control System Based on RBF Neural Networks
基于RBF网络的比例阀-缸位置控制系统
16.
The valve stem with its grooved rings and positioning sleeve indicates the throttled position of the valve.
阀杆及其沟槽环和定位套筒显示阀门的节流位置。
17.
After fitting of the valve, the valve should be maintained in a closed position to prevent any contamination from entering the cylinder.
连接好阀门后，阀门应保持关闭位置，为防止任何污染进入气瓶。
18.
Place the cover onto the spring with the internal guide on the cover positioned inside the end coil.
将阀盖及阀盖上的内部引导放置在弹簧上，定位内部端线圈。