1.
Some glass-hard steel is homemade.
一些有最高硬度的钢是自制的。
2.
Hardness was decreased after maximum by high temperature heating.
高温加热硬度达最大硬度以后保温硬度降低。
3.
Mold base to be minimum hardness of165 BHN.
（2） 模座的最低硬度为165布氏硬度。
4.
Mold base to be minimum hardness of 165 BHN.
模座的最低硬度为165布氏硬度。
5.
a maximum [minimum] thermometer
最高 [最低] 温度计
6.
apparent maximum altitude
视最大高度最大视高度
7.
High permeability alloys with high hardness and high electrical resistance
GB/T14987-1994高硬度高电阻高磁导合金
8.
The period exhibiting the greatest degree of intensity
最高或强度最强的阶段.
9.
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
10.
Because it is easier to make, harder to chip, and stronger than hard porcelain, bone china has become the most popular type of porcelain in some countries.
骨瓷制作工艺简单, 强度高, 较之硬瓷更不易摔碎, 所以在很多国家骨瓷是最受欢迎的瓷器。
11.
mandatory ceiling on emoluments
硬性规定的最高报酬总额
12.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
13.
the maximum temperature, voltage, volume
最高温度、 最高电压、 最大体积
14.
Preparation of Scale Inhibitors Adapting to High Hardness, High Alkalinity and High pH;
耐高硬度、高碱度、高pH值阻垢分散剂的研制
15.
Prepare of a High Hardness Anodize Oxidation Film on 6061 Aluminum Alloy Sheet
6061铝合金薄板高硬度硬质阳极氧化膜的制备
16.
Researching for the micro-hardness and white-layer in the workpiece surface layer in high speed and hard cutting
高速硬态切削工件表层显微硬度与白层研究
17.
latitude by sun's maximum altitude
太阳最大高度求纬度
18.
and with constant working current,the lower scanning speed,the deeper harden layer depth and the higher hardness.
工作电流不变,扫描速度越低,硬化层深度越深、硬度越高。