1.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
2.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
3.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
4.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
5.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
6.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈
7.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
8.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
9.
Washers with cone face
GB/T850-1988锥面垫圈
10.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
11.
horse shoe washer
开口垫圈,马蹄形垫圈
12.
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T9074.2-1988十字槽盘头螺钉和外锯齿锁紧垫圈组合件
13.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
14.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
15.
Lock ring with scre
GB/T884-1986螺钉锁紧挡圈
16.
Curved spring washers
GB/T860-1987鞍形弹性垫圈
17.
Curved single coil spring lock washers
GB/T7245-1987鞍形弹簧垫圈
18.
Wave single coil spring lock washers
GB/T7246-1987波形弹簧垫圈