1.
Fill cooling system (refer to Group 7, Cooling System for the proper procedure).
注入冷却系统（有关正确程序请参阅单元7，冷却系统）。
2.
high pressure coolant injection system
高压冷却剂注入系统
3.
Continue to fill the system until the coolant tank is full.
持续填注冷却系统，直到冷却剂贮藏箱填满。
4.
The cooled wort is inoculated with Saccharomyces yeast and fermentation of the sugar formed from starch during mashing proceeds.
向冷却后的麦芽汁中注入酵母菌,使糖化过程中淀粉降解产生的糖发酵。
5.
To harden the surface or case of(iron or steel) by high-temperature shallow infusion of carbon followed by quenching.
表面渗碳硬化法通过高温条件下对碳的浅层注入并紧接冷却来使（铁或钢的）表面或外壳硬化
6.
The coated strip goes up into cooling tower and is cooled by air blower and water to room temperature.
镀后带钢进入冷却塔,经风冷和水淬槽将其冷却到室温
7.
Study and Application of Numerical Method for Cooling Analysis in Injection Molding;
注塑冷却数值分析方法的研究与应用
8.
Research and Development on Cooling System of Injection Mold CAD
注塑模具CAD冷却系统的研究与开发
9.
Analysis on the Cooling System for Injection Mold of Bottom Cover based on Moldflow
基于Moldflow的底座注塑模冷却系统分析
10.
WARPING AND COOLING ANALYSIS OF COLLAPSE BOX AND OPTIMIZATION DESIGN
盒状注塑件翘曲冷却分析及优化设计
11.
Research on CAD/CAE Technology for Cooling System Unit of Plastic Injection Molds
注塑模具冷却系统库的CAD/CAE技术研究
12.
“Cool only in a domestic refrigerator, do not place in the freezer compartment.
12“只能在家用冰箱中冷却，不要放入冷冻室中。”
13.
ANALYSIS ABOUT JOINTING POINT OF RETURNED COOLING WATER FROM THE SLAG COOLER AND IMPROVEMENT SCHEME THEREOF
冷渣器冷却水回水接入点分析及改进方案
14.
For example, I inhaled air and circulating water cooling tower.
例如空气吸入口及循环水冷却塔等。
15.
On passing into the discharge pipe, the steam condenses.
蒸汽一进入排气管就要冷却。
16.
Melted metal is poured into a mold to harden into shape.
熔化之金属倒入模子中以冷却成形。
17.
steel that has been hardened by immersing it in water or oil to cool it.
浸入水或油中冷却硬化的钢。
18.
After cooling, the emulsion flows into a centrifuge.
冷却后，乳状液流入离心分离机。