1.
Drilling machines-Spindle noses
GB/T2815-1989钻床主轴端部
2.
Modular units for machine tool construction--Spindle noses and adjustable adaptors for multi-spindle heads --Dimensions
GB/T3668.10-1983组合机床通用部件多轴箱主轴端部和可调接杆尺寸
3.
Spindle noses with 7:24 tapers
GB/T3837.1-1983机床工具7:24圆锥联结主轴端部
4.
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3: Bayonet type
GB/T5900.3-1997机床主轴端部与花盘互换性尺寸第3部分:卡口型
5.
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 1: Type A
GB/T5900.1-1997机床主轴端部与花盘互换性尺寸第1部分:A型
6.
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type
GB/T5900.2-1997机床主轴端部与花盘互换性尺寸第2部分:凸轮锁紧型
7.
The transmission is then moved toward the rear until the main gear shaft clears the clutch disk. It can then be lowered to the floor.
然后,把变速器主传动轴的端部从离合器中抽出,可将其放到地面上。
8.
Research on Influence of End Contact and End Restriction in Soil Tri-axial Tests;
土工三轴试验中端部接触和端部约束影响研究
9.
distance from spindle nose to central line of table
主轴端面至工作台中心线距离
10.
the movable part of a lathe that slides along the bed in alignment with the headstock and is locked into position to support the free end of the workpiece.
车床的可移动的部分，能与主轴箱一同沿床身滑动并锁定在加工件尾端。
11.
MAIN BEARING JOURNAL DIAMETER (CRANKSHAFT REMOVED)
主轴承颈部直径（曲轴已卸去）
12.
"Essentially, the steering gear consists of two parts, a worm on the end of the steering shaft and a pitmanarm shaft on which there is a gear sector, toothed roller, or stud."
转向器基本上由两部分组成:装在转向轴末端的蜗杆和转向摇臂轴。
13.
Experimental Study and Calculation of Axial Load Transmission in the Top Section of Encased Columns
劲性砼柱端部轴力传递性能的试验研究与计算
14.
Tenons for spindle noses with 7:24 tapers
GB/T3837.2-1983机床工具7:24圆锥联结主轴端面键
15.
Either extremity of the main axis of a nucleus, a cell, or an organism.
卵细胞的极细胞核、细胞或有机体的主轴两端的任一端
16.
The construction of a church so that its longitudinal axis is from west to east and its main altar is at the eastern end.
圣坛位于东端一种纬轴由西向东、主圣坛在最东端的教堂建筑结构
17.
The bottom bearing applies both labyrinth seal and frame seal, which have good performance of sealing. The main shaft is anticorrosive.
下轴承端盖密封采用双重密封，可确保密封效果，主轴采用防腐新技术，能保护主轴免受腐蚀。
18.
The main components of a spider cardan joint include the spider, yokes and quill bearings, etc.
其主要部件包括十字轴、向节叉以及滚针轴承等。