1.
Multipoint measurement system for the thickness of bearings based on laser micro-displacement
基于激光微位移的轴瓦厚度多点检测系统
2.
Corrugated fiberboard--Determination of thickness
GB/T6547-1998瓦楞纸板厚度的测定方法
3.
Calculation of Dynamic Stress and Fatigue Strength of Crankshaft with Bush Deformation Included
计入轴瓦变形的曲轴动应力和疲劳强度计算
4.
Mooney and Ewart viscometer
穆尼-爱瓦特同轴圆筒旋转粘度计
5.
Analysis on Measurement Approach for Lubricant Film Thickness of Sliding Bearing
滑动轴承润滑油膜厚度测量方法分析
6.
Casting Technology of High Strength and Thick Section Ductile Iron Mainshaft
高强度厚大断面球墨铸铁主轴的铸造
7.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
8.
Automatic measurement system on the axis wall height and opposite side parallelism
轴瓦半径高度及对边平行度自动检测系统
9.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
10.
Experimental Study of Scale Effect on Gas-saturated Coal Samples subjected to Uniaxial Compression
含瓦斯煤单轴压缩的尺度效应实验研究
11.
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
12.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
13.
Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation.
水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。
14.
Remove the depth shims from rear pinion bearing cup bore in axle housinRecord the thickness of the depth shims.
从轴管里的后小齿轮轴承盖孔拆卸限深垫片。记录限深垫片厚度。
15.
Research on Motion Model of Constant h_(eq)Non_circular Crankshaft Grinding
曲轴非圆的恒当量磨削厚度磨削运动模型研究
16.
Multi-Axis Control System Development of Radome Electrical Thickness Measuring Equipment;
天线罩电厚度测量设备的多轴控制系统研制
17.
Analysis,Calculation and Investigation of Minimus Film Thickness of Rolling Bearing
滚动轴承最小油膜厚度的分析计算研究
18.
Measurement and Research on Water Film Thickness of Thrust Bearing for Canned Motor
屏蔽电动机推力轴承水膜厚度测试研究