1.
Direct Chip Attachment Packaging of a 2-D Thermal Flow Sensor
采用芯片直接安装技术封装的风速风向传感器
2.
40L with test lever and short thermostat for installation directly in available tank tappings.
40L型号安全阀配置测试杆和较短的温控器,用于直接安装在容器安装孔上。
3.
Sometimes the camshaft is fitted directly into the cylinder head and operates on the valves without rockers.
有时，凸轮轴直接安装在气缸盖上并且不用摇臂控制阀门工作。
4.
No devices capable of accepting direct connections are currently installed.
目前没有安装可以接受直接连接的设备。
5.
No devices capable of accepting direct connections are currently installed.\0
目前没有安装可以接受直接连接的设备。\0
6.
This valve should be installed vertically, before the use should check whether the push rod is flexible, electrical installation and connection are correct.
本阀垂直安装，使用前应检查推杆是否灵活，电气安装连接是否正确。
7.
If you just want to get started installing new programs, you can skip straight to Installing a Package.
如果您仅仅想立刻了解安装新程序，可以直接跳到“安装软件包”。
8.
Grooved butterfly valves direct connect to pipe using iron pipe size couplings. Grooved valves are easiest to install.
管状蝶阀:采用铸铁管接头直接与管道连接。管状阀门安装最容易。
9.
from setting up the production line to the moment when the finished article is ready for inspection and testing.
从安装生产线起一直到制成品接受检验前。
10.
and packaging and labelling requirements directly related to food safety.
以及与粮食安全直接有关的包装和标签要求。
11.
These precedents came directly from the work of the installations and from the experiences of the students.
这些先例直接来源于安装工作和学生的经验。
12.
When the install script succeeds, you will be directed to the "Welcome" page.
当安装脚本成功后，将会直接跳转到"欢迎"页。
13.
Structural Characteristics and its Erection Technology of Direct Air Cooled Condenser
直接空冷凝汽器的结构特点及安装技术
14.
To locate and adjust(one machine part) at right angles to its connecting part within the machine.
调整成直角安装并调整（机器部件）与机器的连接部分成直角
15.
Avoid placing the balance in close proximity to a heater or otherwise exposing the balance to extreme heat or to direct sunlight.
不要将天平安装在能直接接受阳光照射的地方,也不要安装在暖器附近,以避免受热。
16.
The front end of gearbox can be directly connected to engine by clutch or separate enging or assembled apart in left horizontal type(view from the rear of gearbox).
采用左卧式或右卧式安装（从变速器后端向前看），可通过离合器与发动机直接连接或分开安装。
17.
The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt.
本阀可水平或垂直安装，安装时两法兰连接中间必须加密封垫片，然后均匀锁紧螺栓。
18.
Insert Vista CD-ROM and boot from CD. During installation process, you don't have to key-in any serial number.
直接放入光碟，从光碟开机进行安装，安装的过程中，不需输入任何的序号。