1.
Manufacture Process and Quality Control of Composites Cover Panel of Wing Fuel Tank
复合材料机翼油箱盖板的制造和质量控制
2.
The tank overflowed a little and Thomas hung up the hose and put on the cap and wiped away the splash of gasoline on the rear fender.
油箱里溢出来一点汽油，托马斯把加油管挂好，拧上油箱盖子，擦掉溅在后挡泥板上的汽油。
3.
double-skin pontoon hatchcover
底面铺板箱形舱口盖
4.
Fuel Tank Skid Plate Mtg Studs
燃油箱滑板固定螺椿
5.
oilcloth (excl. flooor coverings)
油布（不包括地板覆盖物）
6.
Forming technique and design of die for cover board of refrigerator
冰箱中盖板冲压成形工艺与模具设计
7.
Cars began using caps that incorporated two valves.
汽车开始使用装有两个阀门的油箱盖。
8.
Replace the oil seal in the timing case cover.
更换在正时箱盖中的油封。
9.
Timing Case Cover Alignment and Seal Installation Tool 6139
正时箱盖对齐和油封安装工具6139
10.
"Such as the hood, the fenders, the roof panels, the door, the instrument panel, the Bumpers and the luggage compartment. "
例如,发动机盖板,挡泥板,车身顶板,车门,仪表板,汽车保险杠和行李箱。
11.
The Theoretic Study on Thin-wall Core Cast-in-site Reinforced Concrete Hollow Floor Structure;
薄壁箱体现浇砼空腹板楼盖结构的理论分析
12.
Remove the differential housing cover and allow fluid to drain.
拆卸差速室盖板并排干油液。
13.
roofing material,tiles, slates,felt,etc
盖屋顶用的材料、瓦、石板、油毡等.
14.
deck securing fitting
甲板绑扎固定用具; 甲板或舱盖上固定集装箱的装置
15.
If equipped, position fuel tank skid plate on vehicle frame sills.
如果配备，在车辆车架门槛上定位油箱滑板。
16.
RESIDUAL LIFE ANALYSIS OF THE SKIM PANEL OF AH-24 WING INTEGRAL TANK WITH CRACKS
安—24机翼油箱含裂纹面板的剩余寿命分析
17.
SMC/DMC molded products: Widely used in electrical field such as bus bar clamp.
广泛地适用于电器制品，防眩板，母线夹，电表箱，井盖等制品。
18.
Numerical Simulation and Parameter Optimization on Forming Process of Inner Panel of Car Luggage;
轿车行李箱盖内板成形数值模拟及工艺参数优化