1.
Seawater Corrosion Resistance Property of 0Cr17Ni4Cu4Nb Martensite Precipitation Hardening Stainless Steel;
0Cr17Ni4Cu4Nb马氏体沉淀硬化不锈钢耐海水腐蚀性能研究
2.
Corrosion Resistance Evaluation of Precipitation Hardening Stainless Steel with Niobium
含铌沉淀硬化不锈钢的耐蚀性评估(英文)
3.
Research and Developing of a New Kind of Cavitation Erosion Resistance Martensitic Precipitated Hardening Stainless Steel;
耐空泡腐蚀马氏体沉淀硬化不锈钢的研究与开发
4.
The Investigation of Casting Martensite Precipitation Hardening Stainless Steels Impeller Materials and Technics;
铸造马氏体沉淀硬化不锈钢叶轮材料及工艺的研究
5.
Effects of Aging Temperature on Performances of Martensite Precipitation Hardening Stainless Steel
时效温度对新型马氏体沉淀硬化不锈钢性能的影响
6.
17.4 ph stainless steel -- Is a martensitic precipitation/age hardening stainless steel offering high strength and hardness.
17.4 ph不锈钢--是一种经过沉降凝结／老化硬化处理的马氏体不锈钢,具有很高的硬度。
7.
Application of orthogonal method in adhesion strength treatment of stainless steel coloring
正交试验法在不锈钢着色硬化处理中的应用
8.
non-scaling steel
不起氧化皮的钢, 不锈钢
9.
Comparison of Work Hardening Behaviors of 18-8 Stainless Steel and Hadfield Steel by Two Methods
两种方法分析高锰钢和18-8不锈钢加工硬化行为的对比
10.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
11.
The Study on the Surface Hardness of Deep Multicomponent Complex Diffusion in ZG1Cr18Ni9 Austenite Stainless Steel;
ZG1Cr18Ni9奥氏体不锈钢深层多元复合渗表面硬化的研究
12.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
13.
Control of Al content in PH15-7Mo steel produced by ESR process
沉淀硬化PH15-7Mo不锈钢采用电渣重熔工艺时Al含量的控制研究
14.
Seat hardfaced with SS410 and seal welded.
配置410不锈钢和密封焊接的阀座硬面。
15.
Turning of Hardened AISI 440C Stainless Steel with PCBN Tool
淬硬AISI 440C不锈钢的车削加工
16.
Hardness of Different Types & Size of Free Cutting Steel
易车不锈钢及易车钢之不同尺寸及硬度比较
17.
PS2040 A is suitable for turning, milling, boring and grinding of heat resistant steel, high nickel steel and stainless steel.
A 极压乳化油适合不锈钢、热钢、镍钢等高硬度金属材料的车削、削、孔、削等加工。
18.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型