1.
draw-off roller
牵引辊,送出罗拉,引出辊,出布辊
2.
The turn roll of 600mm in diameter is mounted on the exit of turn roll room to guide strip into zinc pot.
为将带钢引入锌锅,在出口转向辊室装有一个直径为600mm的转向辊
3.
vine discharge roller
藤叶排出辊，茎叶排出辊
4.
The perfect camber design can be obtained by introducing the center/side ratio concept of contact pressure and choosing proper ratio.
同时引入辊间接触压力的中、边部比值概念并作合理选择，使设计出的辊型更加完善。
5.
Impression cylinder, tracting pressing roller, ink forme roller, and oven are controlled by pneumatics.
⑻压印辊筒、引压辊、墨辊、箱等开闭由气动控制。
6.
In the coating pan, baffles are used to both direct the flow of paint to the pick-up roll and direct air bubbles away from the pick-up roll.
在涂料盘中，挡板应用在引导涂料去带料辊和引导气泡从带料辊移开。
7.
bar throw-off gear
(从辊道拨往冷床)轧件拨出装置
8.
Improvement of Assel Mill Outlet Long-guided Roller
Assel轧管机长导向辊出口台的改进
9.
The technology of precision roll forging by closed die groove of machine driven plough share are researched systematically.
系统研究了机引犁铧闭式型槽精密辊锻技术。
10.
pressure roller
压紧辊，压实辊，压紧辊轮
11.
Design and Research on Variable Frequency Speed Regulation System of C Furnace Charging Table of Hot Rolling Mill;
热轧厂出炉C辊道变频调速系统的设计与研究
12.
To bring or draw out(something latent;educe.
诱出，引出引出或拉出（潜在的某物）；诱出
13.
After introduction of high-pressure roll press, the quality of pellet is improved remarkably and the smooth and stable running of grate-rotary kiln is ensured.
引进高压辊磨工艺后,球团产、量得到了改善,链箅机-回转窑运行稳定。
14.
The roller can not directly contact with the ground, and avoid to contact with the cold metal or other objects.
抽出的热态辊棒不能直接与地面接触,并避免与冷金属以及与辊棒温差太大的物体接触。
15.
Direct drive to the rolls with heavy-duty helical bevel gears where the output shaft is directly coupled to the roll shaft.
高坚固的螺旋斜线轴承直接驱动辊筒。输出轴直接连接辊轴，中间没有任何传动消耗。
16.
Then a retraction less variable precision gap setting method was put forward based on the characteristic of plate gap setting.
基于此特性，提出中厚板电－液联合辊缝设定新方法?无回缩变精度快速辊缝设定法。
17.
A new way for determinating of deformation reference of roller design in roll forming is put forward.
提出了一种滚压成形中辊轮设计变形基准确定的新方法。
18.
This is because the ink will string excessively at the out-going side of the ink rollers and break into a number of pieces.
这是因为油墨在墨水辊转出时拉丝过长，断为数段；