1.
flame lamination
火焰胶合,焰熔层压
2.
heat lamination
火焰胶合，胶熔层压
3.
flame laminating
火焰胶合法,火焰层压法
4.
Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting
火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
5.
Influence of Adding Re-melting on Porosities of Spray-welding Coating on Titanium Alloys Surface and Cause of Porosities
钛合金表面火焰喷焊涂层中气孔的成因及增加重熔对气孔的影响
6.
Study of Microstructure and Properties of HVOF-CoNiCrWC Coatings by Laser Solidification
激光熔凝高速火焰喷涂CoNiCrWC涂层组织与性能的研究
7.
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
8.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
9.
muffle of fused silica
隔焰罩,熔凝氧化硅制
10.
The volcano vomited flames and molten rock.
火山喷出了火焰和熔岩。
11.
The Crystal and Amorphous Phase in Cladding Layer by Compressed Arc Plasma Beam
压缩弧光等离子束熔覆层中晶相与非晶相
12.
Fabrication of the Low Oxygen Partial Pressure Fusing Coatings Formed on Ti-6Al-4V Alloy and the Performances Analysis;
钛合金表面低氧压熔结涂层制备及其性能分析
13.
Simulation on temperature field of pre-coated layer formed by steel dieing and parameters predicting in laser cladding
激光熔覆模压预置层的温度场模拟与参数预测
14.
The technology is studied on steel pipeline surface by hot spraying with oxygen-natural gas.
研究了在钢质管道表面采用氧气―油天然气火焰熔覆玻璃涂层的工艺。
15.
Fabrication of Low Oxygen Partial Pressure Fusing Coating Formed on Titanium Alloy and Coating Oxidation-Lifetime Prediction;
钛合金表面低氧压熔结涂层制备及涂层氧化寿命预测
16.
Effect of Electric Boosting on Heat Exchange in Flame Space of End Port Furnace
电助熔在马蹄焰窑火焰空间热交换中的作用
17.
TiCNi Coating on Steel Surface Via SHS Reaction Rolling Assistant with Oxyacetylene Flame Route
钢表面氧乙炔火焰辅助SHS反应辊压制备TiC-Ni涂层
18.
heat fusion press
热熔转印机，热熔压烫机