1.
Research on Application of 1～15mm Stainless Slag Steel in Electric Furnace
1～15mm不锈渣钢电炉利用工艺研究
2.
A Study on Molten Slag Layer and Slag Film of Mould Flux used in Slab Casting of Stainless Steel 1Cr17
不锈钢1Cr17板坯连铸过程中保护渣液渣层及渣膜的研究
3.
Study on Mold Fluxes for Cr13 Martensitic Stainless Steel Billet;
Cr13马氏体不锈钢方坯保护渣的研究
4.
Study on Mold Flux of Stainless Steel 409 L Slab Casting
409L不锈钢板坯连铸保护渣的研究
5.
Application of dual-high mould powder to CC of Ti-Contained stainless steel
“双高”保护渣在含钛不锈钢连铸中的应用
6.
Microstructural properties and leaching behavior of the stainless steel EAF slag
不锈钢冶炼电炉渣结构性质及浸出行为研究
7.
Chloride ion permeability and reinforcement corrosion of alkali activated slag concrete
碱矿渣混凝土氯离子渗透及钢筋锈蚀性能
8.
Effect of Titania Content on Physicochemical Properties of Mould Flux in Titanium Stabilized Stainless Steel
氧化钛对含钛不锈钢连铸保护渣性能的影响
9.
Use a blast cleaner or power tool to remove weld flux slag, weld metal spatters, weld flux fume deposits, rust and damaged paint film in welded areas.
通过喷砂或电动工具除去焊渣、飞溅焊烟、锈迹和焊接部损坏的漆膜。
10.
Exploring blowhole resistance of new slag system stainless steel electrode by uniform design method
基于均匀设计方法探索新渣系不锈钢焊条抗气孔性
11.
Control of Al content in PH15-7Mo steel produced by ESR process
沉淀硬化PH15-7Mo不锈钢采用电渣重熔工艺时Al含量的控制研究
12.
The verification on stainless steel continuous casting of unidirectional solidification had been carried out by using the process of electro slag induced continuous casting of unidirectional solidification.
用电渣感应连续定向凝固方法,对不锈钢的连续定向凝固进行了试验研究。
13.
anticorrosion anticorrosive
防锈漆 a. 防锈的
14.
cinder block (slag cement)
矿渣（矿渣水泥）砌块
15.
steel and iron slag cement
GB13590-1992钢渣矿渣水泥
16.
blast-furnace cinder
高炉矿渣, 鼓风炉炉渣
17.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型
18.
covered with or consisting of rust.
被锈盖住的或有锈的。