1.
Plain washers--Small series--Product grade A
GB/T848-1985小垫圈--a级
2.
horse shoe washer
开口垫圈,马蹄形垫圈
3.
" Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies"
GB/T9074.8-1988十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件
4.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
5.
Cross recessed small pan head screw and small plain washer assemblies
GB/T9074.5-1988十字槽小盘头螺钉和平垫圈组合件
6.
Cress recessed small pan head screw and big plain washer assemblies
GB/T9074.6-1988十字槽小盘头螺钉和大垫圈组合件
7.
Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T9074.7-1988十字槽小盘头螺钉和弹簧垫圈组合件
8.
Hold the yoke with Wrench 67Remove the pinion shaft nut and washer.
用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。
9.
Washers with ball face
GB/T849-1988球面垫圈
10.
Washers with split
GB/T851-1988开口垫圈
11.
Plain washers--Normal series--Product grade A
GB/T97.1-1985平垫圈-a级
12.
Washers with cone face
GB/T850-1988锥面垫圈
13.
Specifications for spring washers--Single coil spring lock washers
GB/T94.1-1987弹性垫圈技术条件弹簧垫圈
14.
Small circle, small circle, small circle, big circle.
小圈、小圈，小圈、大圈，
15.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
16.
Use care not to score the housing bore when prying out seals and washer.
当拆下油封和垫圈时，要特别小心切勿划伤机座孔。
17.
Inner sphere washers
GB/T1030-1988内球面垫圈
18.
Plain washers--Large series--Product grades A and C
GB/T96-1985大垫圈-A和c级