1.
The door fastens with a hook.
这门是用钩栓紧的。
2.
Lock rings at the end of shaft with bolt
GB/T892-1986螺栓紧固轴端挡圈
3.
Study on Localization Technology of Bolt Fasteners for CPR1000 Internals
CPR1000堆内构件螺栓紧固件的转化设计
4.
To fill(a hole)tightly with or as if with a plug;stop up.
用塞塞紧，栓紧用或仿佛是用一个塞子来填紧（一个孔洞）；堵上
5.
tightening bolt
拉紧螺栓，(铁)风口拉杆
6.
Improper bolt tightening procedure.
螺栓拧紧程序错误。
7.
maneton clamp bolt
可拆卸曲柄颊夹紧螺栓
8.
square collar-head set-bolt
方头凸缘端紧定螺栓
9.
Hold puller screw and tighten puller nut until bushing is remove
握紧拉拔器螺栓，拧紧拉拔器螺母，直至拆下衬套。
10.
hydraulicdevice for tightening tie-bolt
贯穿螺栓上紧用液压装置
11.
Engine Cylinder Head Bolt Tightening Sequence
引擎汽缸头螺栓锁紧顺序
12.
a hand tool that is used to hold or twist a nut or bolt.
用来上紧或扭螺母或螺栓的手工具。
13.
Install the seat/shoulder belt anchor bolt.
安装座椅/安全肩带系紧螺栓。
14.
Replace the body bolts and tighten evenly.
重新放置阀体螺栓，并均匀紧固。
15.
Tighten the engine mount-to-bracket bolts.
拧紧引擎架至支架的螺栓。
16.
Fasteners--Clearance holes for bolts and screws
GB/T5277-1985紧固件螺栓和螺钉通孔
17.
" Tolerances for fasteners--Bolts, screws and nuts"
GB/T3103.1-1982紧固件公差螺栓、螺钉和螺母
18.
Install exhaust heat shield, tighten bolts to 11 N·m.
安装排气隔热罩，拧紧螺栓到11 N·m。