1.
Vortex injection provides a form of swirl or cyclone combustion for a rocket engine similar to systems often employed in industrial furnaces.
涡流喷射在火箭发动机中产生一种涡流或旋涡形式的燃烧，与工业炉中常采用的系统相似。
2.
Study on the Cool Flow Field in Trapped Vortex Combustor with Air Injection
驻涡燃烧室冷态流场气体喷射的研究
3.
Effect of the Hub Cavity Flow on the Flow Structure of an Axial HP Turbine
涡轮封严气体喷射角度变化对主流的影响研究
4.
Furthermore, the horseshoe shape vortex system occurred to the upstream of the jet exit and the layer structure of vortexes occurred to the wake of the reverse flow region downstream of the jet are also investigated.
另外，观测到射流喷口上流的马蹄涡系以及射流逆流区下游尾迹区旋涡的层状结构形式。
5.
Large Eddy Simulation of Flow Around a Strut and Ejection Flow from a Strut Base in Combustor of Scramjet;
超燃冲压发动机燃烧室支板绕流及喷射流场大涡模拟
6.
The two wall jets collide with each other and turn upward to form an upwash fountain which increases the lift force of the upper plate.
包围在喷射流与喷泉流附近的流体会被其带入而在周围形成数个涡流。
7.
axial flow turbojet
轴流式涡轮喷气发动机
8.
Multiphase Large Eddy Simulation of Diesel Fuel Spray Atomization
基于气液两相流大涡模拟研究柴油喷射的雾化过程
9.
Large eddy simulation of secondary eddy for impinging jet
冲击射流二次生成涡的大涡模拟研究
10.
Numerical Simulation of the Influences of Turbulence Intensity on Fuel Spray;
涡流强度对燃油喷雾影响的数值模拟
11.
Study on Gas Separation Performance of Vortex Tube with Supersonic Inlet Nozzles
超音速喷嘴涡流管气体分离性能研究
12.
Spinning Practice of Tencel Organic Cotton Air Jet Vortex Yarn
Tencel有机棉喷气涡流纱的试纺
13.
Experimental study on the vortex tubes with different Mach number nozzles
喷嘴马赫数对涡流管性能影响的实验
14.
Turbulence in air or water caused by the motion or action of an oar, propeller, jet, or airfoil.
涡流由船桨、推进器、喷气机或机翼运动引起的空气或水的涡流
15.
Detached eddy simulation of V-shape arrangement injection holes in ramjet chamber
冲压燃烧室V型燃料喷射结构的分离涡模拟
16.
Analysis of Calculation Model for Spray Characteristics of Pressure Swirl Nozzles
压力涡流喷嘴雾化特性模拟的双相流模型分析
17.
Experimental Study for Wake Vortices of an Impinging Jet in Crossflow
横流冲击射流尾迹涡结构的实验研究
18.
balanced flow easy priming jet pump
平衡流量易引动喷射泵