1.
Many Jacquard attachments in use today are controlled by computer rather than cards.
目前许多提花机构不再由纹板控制,而是由计算机控制。
2.
Preventive measure and the origin of the crack which the stainless steel heat exchanger tube plate
染机换热器管板裂纹成因分析及控制
3.
Analysis and Controlling Methods on Transverse Cracks of Plate Nb Containing Steel Slab
中厚板含铌钢铸坯横裂纹分析及控制措施
4.
Ripple line fillet seams tracking control of a mobile robot for container welding
移动机器人波纹板折线角焊缝跟踪控制
5.
AN ANALYSIS OF CRACK GROWTH SIMULATION AND CRACK ARREST IN INTEGRALLY STIFFENED PANEL
整体加筋壁板裂纹扩展轨迹模拟及控制分析
6.
Causes and Controlling Measures of Continuous Cast Slab Surface Crack
连铸板坯表面裂纹形成原因及控制措施
7.
n. a central control panel
控制台, 控制面板
8.
55 inch thread flat tangential die
55°英制螺纹切线平板牙
9.
corrugating machine, for metal plates or sheets, numerically controlled
金属板材或薄板材波纹机,数控式
10.
The pattern chain controls the harnesses and determines which are to be raised or lowered in order to produce the desired pattern.
纹板链控制着综框并决定着综框的升降,以便形成所需要的花型。
11.
Fracture Growth and Board Kind Structure and It's Non-equal Support in Surrounding Rock of Roadway of Fully Mechanized Caving Coal Face;
综放回采巷道围岩裂纹扩展与类板结构及其非均称控制
12.
Study on Controlling of Welding Deformation and Hot Cracks of Aluminum Lloy Thin Plates by Two Direction Pre-Stress
双向预置应力控制铝合金薄板焊接变形与热裂纹研究
13.
Each cross bar or row of holes in the roll controls a row of the pattern and mechanically determines which warp yarns (harnesses) will be raised and which lowered.
纹板链上的每一排孔控制着花型的一横行(即一根纬纱),用机械方式控制着经纱(综框)的升降。
14.
corrugating machine, for metal plates or sheets, not numerically controlled
金属板材或薄纸材波纹机,非数控式
15.
not numerically controlled card-sharpening machine for working metal
用于金属加工非数控纹板修磨机
16.
smoke control and pressurization panel
烟气控制和增压控制板
17.
card of paper or paperboard[for jacquard mechanisms or similar machines]
纸制或纸板制纹板[用于提花机或类似机器]
18.
The system brings radical change to traditional backward technique.
该系统彻底改变了传统的用大串纹板、钉控制多臂提综、大串梭箱钢板链控制换梭的落后工艺方法。