1.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
2.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
3.
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T9074.2-1988十字槽盘头螺钉和外锯齿锁紧垫圈组合件
4.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
5.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
6.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
7.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
8.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
9.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
10.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
11.
Top view of spring lock washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈的俯视图。
12.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
13.
Remove Pinion Gear Thrust Washer
拆卸主动齿轮止推垫圈
14.
Standard finish of gasket surface is serrated, either spiral or concentric, with125-200 RA finish.
垫圈表面的标准光洁度是锯齿面，或是螺旋形，或是同心形，光洁度为125-200ra.
15.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
16.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
17.
Zigzag Machine
万能机(锯齿形锁缝缝纫机)
18.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈