说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 外齿垫圈
1.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
2.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
3.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
4.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
5.
Remove Pinion Gear Thrust Washer
拆卸主动齿轮止推垫圈
6.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
7.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
8.
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T9074.2-1988十字槽盘头螺钉和外锯齿锁紧垫圈组合件
9.
External tab washers
GB/T856-1988外舌止动垫圈
10.
Washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的垫圈或垫片。
11.
Hold the yoke with Wrench 67Remove the pinion shaft nut and washer.
用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。
12.
Top view of washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的垫圈或垫片的俯视图。
13.
horse shoe washer
开口垫圈,马蹄形垫圈
14.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
15.
Lock washers with angular upturn tab in line to the external tab
GB/T1024-1976角形外舌止动垫圈
16.
Lock washers with angular upturn tab perpendicular to the external tab
GB/T1023-1976角形垂直外舌止动垫圈
17.
"Four anchors with Bolts and washers, per enclosure"
每个外壳配置四个锚栓和垫圈
18.
Install replacement gasket and thermostat housing.
安装替换垫圈及调温器外壳。