1.
The analysing and calculation of the measurement of cam lift rang effected by the cam base circle eccentricity
凸轮基圆偏心影响凸轮升程测量的分析与计算
2.
Analytic Method for Determining Basic Circle Radius of Constant Speed Moving Follower;
解析法确定从动件为等速运动规律的凸轮基圆半径
3.
The Solid Modeling of Disc-type Tool Magazine Based on Cylindrical Index Cam;
基于圆柱分度凸轮圆盘型刀库的实体建模
4.
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
5.
The Cylinder-CAM Organization s Modeling Assembly and Movement Analysis in Solidworks;
基于Solidworks圆柱凸轮机构的建模装配与运动分析
6.
A Reasonsbale Methord to Decide the Basic Circle s Radius Of the Cam;
一种合理确定凸轮机构基圆半径的方法
7.
Technical Design for NC Processing of Spatial Cylindrical Cam NC Machining of Cylindrical Cam Based on MasterCAM
基于MasterCAM软件的圆柱凸轮零件的数控加工
8.
Research on cold forging of spur gears with high boss based on uniform thinking
基于均衡思想高凸台圆柱直齿轮冷锻成形
9.
Digital design of cylindrical end cam based on curve fitting and correction
基于曲线拟合修正的圆柱端面凸轮数字化设计
10.
Solid Modeling and Numerical Control Machining of Sine Groove Cone Cam Based on MasterCAM
基于MasterCAM的圆锥正弦槽凸轮实体造型与数控加工
11.
Design and motion simulation of the cylindrical cam based on Pro/E
基于Pro/E的圆柱凸轮机构设计与运动仿真
12.
revolving cam ring-knitting machine
回转凸轮式圆型针织机
13.
The Method of Checking Cylindrical Indexing Cam Contour with Cam Check Meter
用凸轮检测仪检测圆柱分度凸轮廓面的方法
14.
Defining Minimum Base Radius of Plate Cam for Oscillating Follower by 0.618 Optimization Method
0.618法最优确定盘状摆动凸轮机构的最小基圆半径
15.
The relationship between cam’s pressure-angle and driven-perch’s movement rules and benchmark-circularity’s size;
凸轮压力角与从动杆运动规律及基圆大小的关系
16.
Study on Control Methods of Cutter Location for Machining Cylindrical Cam Based on Double Envelope Principle
基于两重包络原理的圆柱凸轮加工刀位控制方法研究
17.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
18.
Measurement & Error Analysis of Cylindrical Indexing Cam
圆柱分度凸轮廓面的测量及误差分析