1.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座
2.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
3.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
4.
Analysis and design of transformable cam-five-bar mechanism
可变杆长的凸轮—五杆机构分析与设计
5.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
6.
Counter Design of Needle-bar Compound Cam in an Eyelet Buttonholer
圆头锁眼机针杆复合凸轮的反求设计
7.
The Analytic Design for a Kind of Constant-width Cam and Link Mechanism;
一种等宽凸轮-连杆机构的解析设计
8.
Study on Cam Box Mechanism of LL680 Rapier Loom in High-speed Condition
LL680剑杆织机凸轮箱高速化研究
9.
Design of Swing Link Cam Mechanism based on ADMAS and Solid Edge
基于ADAMS与Solid Edge的摆杆凸轮机构设计
10.
Creation and Application of the New Cam-linkage Combined Mechanism
一种新型连杆凸轮组合机构及其应用
11.
Design of Cam and Link Pusher Based on MATLAB and Pro/E
基于MATLAB和Pro/E凸轮连杆推送机构设计
12.
Working Profile Curved Surface Design of Worm Cam Mechanism with Cone Roller
圆锥滚子蜗杆凸轮机构的工作轮廓设计
13.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
14.
Computer Method for Cam Outline Design in Link-Cam Mechanisms
凸轮—连杆组合机构中凸轮廓形设计的计算机方法
15.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
16.
Based on CAD Environment Graphic Method Design Translation Apex Throwout Lever Disk Cam
基于CAD环境下设计直动尖顶推杆盘形凸轮
17.
Dynamic Analysis of Disk Cam Mechanism with Multiple Backlash Pares and Rectilinear Translating Follower
多副间隙推杆从动件盘型凸轮机构动态分析
18.
STUDIES ON A NEW TYPE OF SPHERICAL ENVELOPE WORM INDEXING CAM MECHANISM
新型球面包络蜗杆分度凸轮机构的研究