1.
Both single and double fillet welds shall be as follows unless otherwise shown on the drawing.
除非图上另外标明，所有单、双面贴角焊缝高度如下。
2.
The old method of soldering metal sheets together has now been largely replaced by welted joints, which are made by a special efficient mechanical device.
搭接贴角焊接金属薄板的老方法,现今已基本上为对接坡口焊所取代。
3.
There! Now it's in the top, right corner!
贴好了！现在把它贴在右上角了！
4.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
5.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
6.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
7.
Effect of Welding Angle on Fatigue Performance of Welded Structure
焊接角度对焊接结构疲劳性能的影响
8.
Hexagon weld nuts
GB/T13681-1992焊接六角螺母
9.
Solder paste is applying for the connection between the mount components foot and PCB pads in the SMT assembly.
在表面贴装装配的回流焊接中，锡膏用于表面贴装元件的引脚或端子与焊盘之间的连接。
10.
Study on the Reliability of SMT Solder Joint in Electronic Packaging;
电子封装中表面贴装焊点的可靠性研究
11.
Effects of Voids on Thermal Reliability in Power Chip Die Attachment Solder Layer
空洞对功率芯片粘贴焊层热可靠性影响的分析
12.
Solder Joint Shape Prediction of Microelectronics Assembly Surface Mount Component
微电子组装表贴元件焊点三维形态预测
13.
Automatic submerged arc welding is the method for medium/ thick plate welding, but it mainly to be used in flat welding and fillet welding.
埋弧自动焊是焊接中厚板常用的焊接方法,但常规用在平、角焊位置的焊接。
14.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
15.
Application of ultrasonic sensor in automatical welding of right-angle welding seam
超声波传感器在直角焊缝自动焊接中的应用
16.
Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
焊工操作手法对不锈钢薄板角焊缝质量的影响
17.
Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe
外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响
18.
Shall I stick the stamp on the upper right corner of the letter ?
要不要把邮票贴在信的右上角？