1.
Experimental Study on the Effects of Porcelain Etching Agents on the Bonding Performance of Porcelain;
牙科陶瓷酸蚀剂对陶瓷粘结性能影响的实验研究
2.
Effects of Nano-silica Coating on Shear Bond Strength of High-strength Ceramic;
纳米硅涂层对牙科高强度陶瓷粘结强度的影响
3.
Study on dry-mixed superfine sand mortar for bonding ceramic tile
干混特细砂陶瓷墙地砖粘结砂浆研究
4.
Silicon Sol Agglutinated Ceramic Core by Pouring Forming
以硅溶胶为粘结剂的浇注成型陶瓷型芯
5.
Study on Binder Removal Behavior of Wax-based Binder of Ceramic Injection Molding;
陶瓷注射成型石蜡基粘结剂热脱脂行为研究
6.
Study of clay bonded SiC composite ceramic used for solar energy storage
用于太阳能储热的粘土结合SiC复相陶瓷研究
7.
Preparation of Nanoporous SiC Ceramics by Preceramic Polymer Bonding Method
先驱体聚合物粘结法制备SiC纳米多孔陶瓷
8.
Study on Microcrystalline Glass Materials Using for Joining Ceramic with Ceramic
陶瓷-陶瓷粘接用微晶玻璃材料的研究
9.
method of sampling for ceramic whiteware clays
陶瓷用粘土取样方法
10.
STRUCTURAL CERAMICS AND THEIR SUPERPLASTICITY Ⅰ.Introduction of Structural Ceramics
结构陶瓷及其超塑性 Ⅰ．结构陶瓷简介
11.
Study on the Heat Resistant Adhesives for Bonding Metals to Ceramics;
粘接金属与陶瓷的耐高温胶粘剂研究
12.
The alcohol in the mold must be fired up immediately to avoid fissure.
然后用硅酸乙酯水解液作为粘结剂，灌制出陶瓷型铸型。
13.
A technique for making ceramic mold bound with phosphate was introduced.
介绍了一种以磷酸盐为粘结剂制作陶瓷型的工艺方法。
14.
Preparation of Compound Binder Ceramic Mould for Titanium Alloy and Interface Reaction Research
钛合金用复合粘结剂陶瓷型壳研制及界面反应研究
15.
Effect of Binder Phase on Microstructure and the Cutting Properties of Ti(C, N)-based Cermets
粘结相对Ti(C, N)基金属陶瓷组织和切削性能的影响
16.
Study on Feedstock Component and Debinding Technology for Al_2O_3 Ceramic Injection Molding with Water-based Binder
Al_2O_3陶瓷注射成型水基粘结剂喂料组成及脱脂工艺研究
17.
Study on bond strength of K_2O-Al_2O_3-SiO_2 system dental glass ceramics cemented with Variolink~ Ⅱ luting system to dentin
K_2O-Al_2O_3-SiO_2系统牙科玻璃陶瓷与牙本质粘结强度的实验研究
18.
Low-Temperature Sintering of ZnNb_2O_6 Ceramics;
ZnNb_2O_6陶瓷的低温烧结研究