1.
digit output relay option
数字输出继电器任选
2.
"Under normal conditions the resistance remains between the leakage and over-temperature sensitivities, and both output relays are de-energized."
正常状态下,残留在泄露和过热感应器和各自的输出继电器上的电阻会被释放。
3.
ABS Main Relay Output
ＡＢＳ主继电器输出
4.
SYSTEM RELAY OUTPUT CIRCUIT
系统继电器输出电路
5.
Trans Control Relay Output
变速控制继电器输出
6.
ABS PUMP/MOTOR RELAY OUTPUT
ＡＢＳ泵／马达继电器输出
7.
Open system relay output circuit to the pump relay coil
打开系统继电器输出泵继电器线圈电路
8.
This relay connects one input to one output.
该继电器将一个输入连接到一个输出。
9.
Open ABS pump/motor relay output circuit
开放到ＡＢＳ泵／马达继电器的输出电路
10.
HI/LO WIPER RELAY LO SPEED OUTPUT
ＨＩ／ＬＯ雨刷继电器低速输出
11.
BR/WT Pump/Motor Relay Output
ＢＲ／ＷＴ泵/发动机继电器输出
12.
BR/OR Hi/Lo Wiper Relay Lo Speed Output
ＢＲ／ＯＲ ＨＩ／ＬＯ雨刷继电器低速输出
13.
TRANSMISSION CONTROL RELAY OUTPUT (Switched B )
变速控制继电器输出（切换Ｂ（+））
14.
PROBE THE ABS SYSTEM RELAY OUTPUT, CAVITY 4
探察ＡＢＳ系统继电器输出，槽４
15.
IS THE SYSTEM RELAY OUTPUT CODE PRESENT?
是否存在系统继电器输出代码？
16.
MEASURE THE RESISTANCE BETWEEN THE SYSTEM RELAY OUTPUT CKT AND GROUN
测量系统继电器输出电路与地线之间的电阻。
17.
WITH THE DRB IN OHMMETER MODE, PROBE THE SYSTEM RELAY OUTPUT CIRCUIT.
当ＤＲＢ处于欧姆方式时，检测系统继电器输出电路。
18.
The states of the unit's relay outputs are determined by the series combination resistance of the leakage and temperature sensors.
泄露和温度感应器的串联组合电阻决定报警器继电器的输出状态。