1.
The atomization characteristics of wet flue gas desulfurization spray tower under single layer spraying
湿法脱硫喷淋塔单层喷淋雾化性能试验
2.
Numerical Simulation for Hollow-spraying-tower Flow Field of large-scale Wet Desulphurisation Spraying Tower
大型湿法脱硫喷淋塔空塔流场数值模拟研究
3.
Simplifying and validating the model of wet flue gas desulphurization spray tower for 660MW units
660MW机组湿法烟气脱硫喷淋塔的简化模型及仿真验证
4.
Comparison between Spray Tower and Jet Bubbling Reactor Flue Gas Desulfurization Techniques
喷淋塔、鼓泡塔烟气脱硫技术的比较
5.
Experimental Study on Desulfurization and Nitrification in Spray Scrubber;
筛板式喷淋塔脱硫脱硝性能试验研究
6.
Experimental Study on Hydrodynamics and Desulfurization Characteristic of Nozzle in Spray Scrubber;
喷淋塔中喷嘴流体特性及脱硫特性试验研究
7.
Experiment Research & Numerical Simulation about Flow Field in a Spray Scrubber of Desulfurization;
喷淋式脱硫塔内流场的试验研究和数值模拟
8.
Technical Characteristic of XZKP Model FGD Device with High Efficiency and Hollow Tower Spray
XZKP型高效空塔喷淋烟气脱硫装置技术特点
9.
Experimental Study on Pressure Drop Characteristics in a WFGD Sieve Tray Spray Scrubber
湿法烟气脱硫筛板式喷淋塔阻力特性的试验研究
10.
Numerical Simulation of Flow Field Inside WFGD Under Different Spray Levels Operation
不同喷淋层投运方式下脱硫塔内流场特性的数值研究
11.
The Analysis about The Scaling of Nozzle in Flue Gas Desulfurization Absorber
烟气脱硫吸收塔喷嘴堵塞问题的分析
12.
COMPARISON OF DESULFURIZATION PERFORMANCE BETWEEN CONVENTIONAL AND NOVEL JET BUBBLE REACTOR WITH PIERCED CYLINDRICAL GAS INLET DEVICE
新型喷射鼓泡塔与传统鼓泡塔脱硫的性能比较
13.
Study on Dedusting and Desulfurizing Mechanism and Mathematical Modeling with Spray and Cascade-ring Reactor;
喷淋环栅式反应器脱硫除尘机理及模型研究
14.
Study on the Flushing Flux for Flushing Nozzles of a Demister in Wet Desulphurization Tower
湿式脱硫塔除雾器冲洗喷嘴冲洗流量研究
15.
Study on Large Scale Limestone-gypsum Spraying Desulphurization Technology and Project Application;
大型石灰石—石膏湿法喷淋脱硫技术研究及工程应用
16.
Experimental Study on Concentration Distribution and Numerical Simulation of Flow Field in Multiple-Spout FGD Tower;
多级喷动烟气脱硫塔内浓度分布实验及流场数值模拟
17.
The Experimental Study of a New Semi-Dry Desulfurization Using Spray Spouted Bed;
喷雾—喷动床半干法烟气脱硫实验研究
18.
Influential factors of end-point sulfur content in the process of hot metal desulphurization by magnesium injection
影响铁水喷镁脱硫终点硫含量的因素