1.
In this paper the on-line real-time detecting system of molder surface temperature of continuous casting is designed.
设计了连铸铸坯表面温度在线实时测量系统。
2.
Setting of Object Surface Temperature of Casting Slab Based on Support Vector Regression
基于支持向量机回归的铸坯表面目标温度设定
3.
Numerical simulation of surface temperature of Q345 bloom in continuous casting
Q345大方坯连铸过程表面温度变化的数值模拟
4.
A slab surface temperature prediction model based on least square support vector machine
基于支持向量机的连铸板坯表面温度预测
5.
A Research Based on a Method of Surface Temperature-feedback Continuous Casting Slab Secondary Cooling Control;
一种基于表面温度反馈连铸板坯二冷水控制方法的研究
6.
Numerical Simulation of Mould/billet Temperature and Concentration Field in the Continuous Casting of Round Billet;
圆坯连铸结晶器/铸坯温度场与浓度场数值模拟
7.
Influence of Oxide Skin Thickness on Photoemissivity of Polarizing Angle from Surface of Continuous Casting Billets
氧化层厚度对铸坯表面偏振角发射率的影响
8.
Practice of controlling the surface transverse crack of high-strength Niobium bearing steel for continuous casting slab
控制高强度含铌连铸板坯表面横裂的生产实践
9.
Compared it with conventional billet,billet cast with high frequency electromagnetic field,on which depth of surface oscillation mark was decreased remarkably,had a smooth surface.
施加高频电磁场的铸坯与传统连铸坯相比 ,表面振动痕深度明显减小 ,且表面光滑
10.
Study on the Temperature and Stress State of Thin Slab in Continuous Casting;
薄板连铸坯的温度与应力状态的研究
11.
The Applying Research of Soft Sensor Technology in Forecasting the Surfaced Temperature of Billet
软测量技术在预测钢坯表面温度的应用研究
12.
Billet Surface Temperature Measuring in the Thick Board Factory of Jinan Steel Group
钢坯表面温度检测系统在济钢中厚板厂的使用
13.
The sizes of slabs, the casting speeds of CCM and the cooling methods in second cooling zone are key factors which affecting the temperature of slabs out of CCM.
影响铸坯出连铸机温度的主要因素是铸坯尺寸、连铸机拉迪和冷却制度。
14.
Analyses of cause for transverse cracks on CC slab surface
连铸板坯表面横向裂纹产生原因分析
15.
Analysis and Improvement on Surface Quality of CC Round Billet for Pipe－rolling with Mandrel Mill
连铸连轧圆管坯表面质量分析与改进
16.
ANALYSIS ABOUT NET-SHAPE CRACKS ON THE SURFACE OF A350 LF6 CONTINUOUS CASTING BILLET
A350 LF6连铸坯表面网状裂纹分析
17.
CC-slab surface longitudinal crack prediction by using neural networks
基于神经网络的连铸坯表面纵裂预测
18.
Control technology of surface quality of 360mm×450mm CC bloom
360mm×450mm连铸大方坯表面质量控制技术