1.
Finite Element Simulation of Die Forging Process for 7075 Al-alloy
7075铝合金模锻成形过程有限元模拟
2.
The Application of Water Immersion Ultrasonic C-scan in Special Aluminum Alloy Mold Pieces;
水浸超声C扫描在特殊铝合金模锻件中的应用
3.
Die forgings of aluminium and aluminium alloy--Dimensional tolerance and machining allowance
GB/T8545-1987铝及铝合金模锻件的尺寸偏差及加工余量
4.
Process research on preparation of aluminum alloy die-forging blank with right-angled bends on both sides
两侧带直角弯的铝合金模锻件坯料制备工艺研究
5.
Isothermal Forging Process of 2214 Alloy Anti-torque Arm
2214铝合金防扭臂等温模锻工艺的研究
6.
Liquid Die Forging Technology for 5083 Aluminium Alloy Flange
5083铝合金法兰盘液态模锻成形技术
7.
magnesium-aluminium-zinc alloys, unwrought
镁铝锌合金,未锻造
8.
Isothermal forging process of upper anti-torque arm of 2214 alloy
2214铝合金上防扭臂等温模锻工艺的研究
9.
Numerical Simulation and Optimization of Large Al Alloy Part Forging Process
大型铝合金锻件成形工艺数值模拟及优化
10.
Simulation of forging deformation for 2A12 aluminum alloy with Deform 3D
采用Deform 3D对2A12铝合金锻造变形的模拟研究
11.
Influence of Modificator on Mechanical Properties of Liquid Forging Aluminum Alloy
变质剂对液态模锻铝合金力学性能的影响
12.
Numerical Simulation of Liquid Forging of Aluminum Alloy Wheels of Special Car;
特种车辆铝合金轮毂液态模锻成形中的数值模拟
13.
Study on the Key Technology of Precision Die Forging for High Strength Al-alloy Parts in Car;
轿车高强度铝合金零件精密模锻关键技术的研究
14.
Research of the Stress and Strain Evolution on the Aluminum Alloy Hot Forging Die;
铝合金热锻模具结构中的应力应变演变过程分析
15.
Effect of Pressure Parameters on Properties of A357 Alloys in Semi-Solid during Thixoforging;
力能参数对A357铝合金半固态触变模锻件性能的影响
16.
Research on Inhomogeneity of Microstructure and Mechanical Properties for 2A50 Aluminum Alloy Prepared by Thixoforging
2A50铝合金半固态模锻成形的组织性能不均匀性研究
17.
Effect of Content of Mg,Cu and Zn on Mechanical Properties of Al-alloy Under Liquid State Forging
Mg、Cu和Zn含量对液态模锻铝合金力学性能的影响
18.
Reasons and precautions of flow defects for stamp forging of 2A50 aluminum alloy joint
2A50铝合金接头模锻件穿流缺陷的产生原因及预防措施