1.
Analyzing and Measuring the Depth of Large sized Jar Sealing Groove;
大尺寸缸体密封槽深度的分析与测量
2.
Study on Fluid Hydrodynamic Mechanical Seals with Deep Circular Grooves;
圆弧深槽液体动压机械密封性能研究
3.
Theoretical and experimental study of fluid dynamic mechanical face seals with deep spiral grooves;
深螺旋槽流体动压机械密封性能理论研究
4.
An Improved Design on Seal Groove and Seal Ring of Spherical Plain Bearing
关节轴承密封槽及密封圈的设计改进
5.
For diving there's small sealed tank inside, the negative tank.
为了下潜，里边还有个密封小水槽―负槽。
6.
Finite Element Analyse of the Distortion of Sealing Ring of Spiral Groove Gas Face Seals;
螺旋槽气体端面密封密封环变形有限元分析
7.
Numerical Simulation and Optimum Groove Geometric Parameters for Spiral Groove Dry Gas Seal;
螺旋槽干气密封数值模拟及其槽形参数优化
8.
The circular arc wiring duct also called it separates wiring duct /the insulation wiring duct /seal type wiring duct /arc the circular arc wiring duct /walk wiring duct.
圆弧线槽也称之为圆弧型隔线槽/绝缘线槽/密封式线槽/弧线槽/走地线槽。
9.
Technical Research on the T-Groove Dry Gas Seals of the Compressor;
压缩机用T型槽干气密封技术的研究
10.
Research on Performance of Dry Gas Seal with Single-row Bidirectional Spiral Grooves
单列双向螺旋槽干气密封的性能研究
11.
Research on the Sealants to be Used to Fill Cracks and Repair Potholes in Asphalt Roads
沥青路面裂缝填封和坑槽修补用密封胶的研制
12.
Optional mounting configurations (clamp, flange, plate) and tank sealing solutions (packed, mechanical, lip) are available upon request.
可提供多种安装结构（卡盘式，法兰式，板式）和槽罐密封形式（填料密封，机械密封，油密封）。
13.
Precise Machining Technology of Thin-Wall and "Deep-Hole" Inner-Conductor Chocke-Slot
内导体薄壁“深孔”扼流槽精密加工技术
14.
Performance Research on a Spiral-Groove Dry Gas Seal with an Inner Annular Groove
带内环槽的螺旋槽干式气体端面密封的性能研究
15.
Trim or remove excess sealant film in the rear main cap oil pan gasket groovDO NOT remove the sealant inside the rear main cap slots.
修整或清除后主盖机油底壳垫圈凹槽中过多的密封剂薄膜。切勿清除在后主盖槽中的密封剂。
16.
Remove the rubber grommet seal from the reservoir and discar
从储液槽中拆下橡皮套环密封并抛弃它。
17.
Install window glass channel and belt weatherstrip seals.
安装车窗玻璃滑动槽和皮带防水饰条密封。
18.
STUDY ON OUTWARDLY PUMPING CIRCULAR ARC GROOVED LIQUID FACE SEAL WITH ZERO-LEAKAGE
泵出式圆弧槽无泄漏液体端面密封研究