1.
Development and Application of Uunsoldering Equipment for Printed Circuit Board Scraps
废弃印刷电路板脱焊设备的研制与应用
2.
Dried flux is liable to flake off, exposing metal surfaces to oxidation.
干燥的焊剂会脱落，是暴露的金属表面被氧化。
3.
"The entry section is started again. The strip of next coil passes through welder, bridle, goes into deoiling section. "
再次启动入口段,让后继带钢通过焊机、张力辊进入脱脂段
4.
Cause Analysis and Quality Control of the Abjunction of the Tube Bundles and the Seepage of the Weld Seam of an Autoclave
压煮器管束脱落与焊缝渗漏的原因分析及质量控制
5.
Refinement of Grains, Plastic Deformation Recrystallization, Aging Precipitation and Weldability Study of the Magnesium Alloys Containing Rare Earth;
含稀土镁合金细晶化、塑性变形再结晶、时效脱溶及焊接性研究
6.
Alloy Steel Backing Design of Inlet Flue Gas Duct of FGD Absorber and Welding Technique Analysis
烟气脱硫吸收塔入口烟道合金钢贴衬设计选型及焊接工艺分析
7.
4 No splash fire like that from electric welding within the scale 2m of the dewatering machine is allowed, for the sake of damaging mesh-belt of the dewatering machine.
4脱水机放置地周围2米不许有如电焊作业之类的飞溅明火，以防损坏脱水机网带。
8.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
9.
stick feeder machine
焊丝进给自动弧焊机
10.
electrode ,metal contact, for welding machines
电焊机金属接点焊条
11.
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
12.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
13.
Excellent in solderability and high heat resistance with either flow or reflow soklering.
可焊性和耐焊性优，适用于流焊和再流焊。
14.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
15.
Welding agent is a kind of medicament that is used to help welding, and improve quality.
焊药是帮助焊接, 提高焊接质量的药剂。
16.
Study of Flux for Microelectronics Soldering and Microstructure of Solder Joint;
微电子焊接助焊剂及其焊点组织研究
17.
Ceramic Cushion of Steel Pipe Weld Aided Device and Its Welding Procedure
钢管焊缝陶瓷垫补焊装置及焊接工艺
18.
electrode ,of base metal, coated or cored with flux, for soldering, brazing or welding
焊条,贱金属制,外涂或内心装有焊剂,用于软焊,硬焊或熔焊