1.
Top pouring is the simplest and cheapest method, but gives poor control over the rate of pouring.
上注法最简单，成本最低，但不好控制浇注速度。
2.
Study on Semisolid Feedstock of A356 by Controlled Pouring Methods;
控制浇注方法制备A356半固态坯料的研究
3.
The molten metal may enter the ingot mould in two ways: from the top and from the bottom. Top pouring is the simplest and cheapest method, but gives poor control over the rate of pouring.
钢液注入钢锭模可采用两种方式:上注和下注。上注法最简单，成本最低，但不好控制浇注速度。
4.
Fabrication and Mechanism of Non-dendrite Structure in Semi-solid ZL101 Alloy by Controlled Pouring Temperature
控制浇注温度制备的半固态ZL101合金的非枝晶组织
5.
Rebuilding a Electric Control System of HLZ10C Piston Casting Machine
HLZ10C型活塞浇注机电气控制系统温控改进设计
6.
Magnitude Control of Partial Discharge of Epoxy Resin Cast Earth Transformers
环氧浇注接地变压器局部放电量的控制
7.
The Design and Research of Auto-pouring Control System Based on CCD Sensor;
基于CCD图像传感的浇注控制系统设计与研究
8.
Study on Constant Volume Weight Control Technology for Pb-Ca Alloy Automatic Casting System(Cound.)
铅钙合金自动浇注系统恒容重控制技术研究(续)
9.
Study on Constant Volume Weight Control Technology for Pb-Ca Alloy Automatic Casting System
铅钙合金自动浇注系统恒容重控制技术研究
10.
Optimization Design of Runner System and Default Control in the Injection Molding Based on Flow Simulation;
基于流动模拟的注塑成型浇注系统优化设计与缺陷控制
11.
Application of Valve-gate Technology in the Control of Weld Lines of Large Injection Molded Products
阀式浇注技术在控制大型注塑件熔接痕中的应用
12.
A metering pump regulates the amount of lead to the pour lead with no excess lead return to the pot.
计量泵控制着输给浇注头的铅量，没有过量的铅返回铅锅。
13.
Research on Construction Control and Model Test of Cantilevering Casting Construction of Long-Span RC Arch Bridge;
大跨度钢筋混凝土拱桥悬臂浇注施工控制与模型试验研究
14.
Application of Multi-gates Sequence Control Technology in the Injection Molding of Auto Lamp Lens
多浇口顺序控制技术在车灯面罩注射成型中的应用
15.
Analysis and Control of Weld Marks of Auto Lamp Reflector Based on Valve-injection
基于阀式浇注系统的车灯反射体熔接痕的分析与控制
16.
feeding control case for depositing and mixing of concrete
混凝土浇灌给料控制箱
17.
The linearis monitoring under skew continuous box girder bridges cast with balanced cantilever method
悬臂浇注斜交连续箱梁桥的线形监控
18.
Preparation of Mg-Ni-Si Metallic Glass by Vibration Casting Process;
震动浇注法制备Mg-Ni-Si金属玻璃