1.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
2.
Comparative Analysis and Research of RR, TR and NTR Upset-Bending Processes for Heavy Crankshaft of Continuous Grain Flow;
曲轴全纤维弯曲镦锻成形技术RR法、TR法、NTR法对比研究
3.
Study on Eliminating Forging Accessorial Block of the Continuous Grain Flow Crankshaft Which Forming in the RR-equipment
全纤维曲轴RR镦锻消除锻造余块的工艺探索
4.
The Design and Analysis of a New Structure Full-Fiber Crankshaf Upsetting-Bending Hydraulic Press
全纤维曲轴弯曲镦锻液压机新结构设计及分析
5.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
6.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
7.
Development and application of a CAD/CAE system for the TR forging die for crankshaft
曲轴TR镦锻模具CAD/CAE系统开发与应用
8.
Failure analysis of upset-bending equipment for a heavy crankshaft with continuous grain flow
大型全纤维曲轴TR镦锻装置失效分析
9.
The Method of Upsetting Short Steel Ring in Hot State for Measuring the Blow Energy of Hammer
用钢质短圆环热镦粗法测定锻锤打击能量
10.
Analysis of TR Upset-Bending Process and Equipment Optimization for Heavy Crankshaft with Continuous Grain Flow
大型全纤维曲轴TR镦锻成形分析及装置结构优化
11.
Influence of Training with Secondary Load on Bending Fatigue Strength of Cranksh aft
次载锻炼对曲轴弯曲疲劳强度的影响
12.
FE Simulation of Automobile Forward Shaft on Bending Forming and Whole Final Forging Procedure;
汽车前轴锻件弯曲与整体终锻过程有限元模拟
13.
Tests used to assess the ductility and malleability of stainless steel subjected to bending.
测试不锈钢在弯曲状态下的延展性及可锻性。
14.
FEM analysis of hot bending process for 17 type of coupler yokes
17型锻造钩尾框热弯曲成形过程数值模拟
15.
testing method for flexing endurance of light leathers and their surface finishes
皮革耐弯曲性试验方法
16.
testing method for flexural creep of plastics
塑料弯曲蠕变试验法
17.
Profile design for stretch bending die of extrusions considering springback
考虑弯曲回弹的拉弯模外形设计方法
18.
transfer header
连续自动式凸缘件镦锻机