1.
The analytical investigation of nonlinear creep crack growth is in its infancy and much remains to be learned and done.
对于蠕变裂纹扩展的分析研究还是处于初期阶段，还有许多事情有待于认识和完成。
2.
Room Temperature Creep and Its Effect on Fatigue Crack Growth of Structural Steels;
结构钢的室温蠕变及其对疲劳裂纹扩展的影响
3.
Numerical Simulation Analysis of Crack Opening of 1.25Cr-0.5Mo under Fatigue-Creep Interaction
蠕变条件下1.25Cr-0.5Mo钢疲劳裂纹扩展数值模拟分析
4.
STUDY OF CHARACTERISTICS OF MODE Ⅱ PROPAGATION CRACK TIP FIELD IN CREEPING MATERIALS WITH HARDENING EFFECT
蠕变硬化材料中Ⅱ型扩展裂纹尖端场特性研究
5.
Studies on Crack Propagation under Fatigue-creep Combined Action of 316L Steel at High Temperature;
316L钢高温疲劳蠕变共同作用下裂纹扩展速率研究
6.
Study of cold crack initiation and propagation of compacted graphite iron weld
蠕墨铸铁同质焊缝冷裂纹启裂与扩展研究
7.
Room Temperature Creep at Crack Tip in SUS304 Stainless Steel and Its Influence on Fatigue Crack Growth;
SUS304不锈钢裂纹尖端的室温蠕变现象及其对疲劳裂纹扩展行为的影响
8.
Numerical Simulation Analysis of the Creep Crack Characteristics of 2.25Cr1Mo Steel
2.25Cr1Mo钢蠕变裂纹特性数值模拟分析
9.
Study on the High-temperature Creep Behavior and the Estimation of Creep Crack Parameter C～* of Cracks in Bi-material CT Specimen;
双材料CT试样裂纹高温蠕变行为的研究与蠕变断裂参量C～*的估算
10.
Crack defect promotes crack initiation and growth.
裂纹缺陷促进了裂纹的萌生和扩展.
11.
initiation of stable crack growth
稳态裂纹扩展的开始
12.
Experimental Research on Fatigue Crack Growth Modes Transition in Near-threshold Regime
疲劳近门槛值区裂纹扩展模式变化的试验研究
13.
Study on Multiaxial Cyclic Stress of Varying Amplitude Fatigue Crack Growth Rate
多轴变幅加载下疲劳裂纹扩展速度的研究
14.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
15.
RESEARCH ON THEORY AND EXPERIMENT OF THE TEMPERATURE FIELD AT CRACK TIP
裂纹扩展过程中裂尖塑性流变区温度场的理论和实验研究(英文)
16.
Analysis of Strength Factor for Non steady Creeping Crack Tip Field
非稳态蠕变二维裂纹尖端场强近似分析
17.
Crack-tip Fields in Creep Damage Materials and Acoustic Detection of Mesodamage;
蠕变损伤裂纹尖端场与细观损伤的声学探测
18.
The modified tensile stress crack propagation criterion and influence of cranny hydraulic pressure on crack propagation
修正的拉应力裂纹扩展准则及裂隙水压对裂纹扩展的影响